•  
    Page 2 of 2 FirstFirst 12
    Results 11 to 20 of 20

    Thread: Add. To My Timing Belt Replacement Post....MPG Issue Question.....

    1. #11
      AVEO OWNER
      Join Date
      Apr 2011
      Location
      pa
      Posts
      30
      Thanks
      1
      Thanked 4 Times in 4 Posts
      When I bought the car it had 69000 miles on it, and the dealer changed it right before I took it home. However it now has129000 miles on it so it's time to get it changed. Thanks for your info on the pricing. Now the next dilemna, do I spend $700.00 on a nice car but with a trade in value of only about $300.00, it's and 04 with 129000 miles.
      Quote Originally Posted by FlaAveo5 View Post
      Your not being nosy..i posted the price on here in a timing bel post, last week, when i had it done. I guess you just missed it. I am TOLD that it varies state to state..and here in south Fla. it is VERY expensive. Compared to the rest of the country. I paid $771, for a Continental kit, it was $223 on the bill, online it runs around $156 but it needs the 3 seals that dont come with it that you need. But they are all of $4 to get. The rest was labor cost. IF yuo are a gearhead and know how to work on your car, I am told it is a 2-3 hr job and 'its so easy to do, just take your time'...but I have no tools,or floor jacks, to life the engine, let alone trust myself to do THIS big of an engine job.

      The Continental kit has the most parts in the kit. Seals, 2 tensioners, and some other tiny parts. Not just a belt and water pump. It has a 2 yr warranty as well! And I got a 2 year warranty on the labor from the mechanic/garage that did the job. I have never heard of a 2 year warranty for any car repair.

      My timing belt lasted for 11 yrs, and i have the old one, it LOOKS new still. But as everyone told me, it can look new and still snap at any second. I also only have 39K miles on it, its all city driving, and I drove it like a 'little old lady', constantly worried the belt would snap at any moment, for the past 5 years!!!! But here in south Fla. it is SO hot, and the belt was 11 yrs old, so it is in a super hot engine compartment, fo all that time, and rubber only lasts so long. When did you have your replaced? what mileage....2 times? You must have a lot of miles on your Aveo??? Hope that helps. People on here have criticized me that I paid WAY to much. BUT it was professional done, and I have a 2 year warranty on parts and labor. But I searched for 5 years for the lowest price, using the Continental kit, and it ranged from my $675, 2 years ago, it went up to $690 plus taxes. To $1,300 at Chevy!!! But most other garages all wanted over $900. So I am happy I have it done, and with the little I drive, it is the last time I am doing it! But i'd like to know about your replacements, if you care to tell me.




    2. The Following User Says Thank You to glen1 For This Useful Post:

      FlaAveo5 (11-04-2017)

    3. #12
      Should I keep it?
      Join Date
      Jul 2017
      Location
      Ontario, Canada
      Posts
      68
      Garage empty: add car
      Thanks
      7
      Thanked 16 Times in 15 Posts
      Hardly believe you were 'ripped-off'
      I bought my kit a few months back and it was about $200 dollar (CDN), I went to a local supplier I use so I can see the quality of the parts I am getting (full kit incl seals, made in Germany). If I order on-line I'm not sure what will show up!
      On the flip side , there are many parts I would order on-line from Rock Auto and such (guess im just a little picky that way).
      Labour rates at shops where I am generally range around $90-$100 an hour, 'Stealerships' closer to $125-$145.
      I also believe the 1.6 hr time estimate is on the lean side (even for a shop).
      I did mine myself in about 4 hrs, with the seals being the biggest PITA as I didn't have a puller.
      But you have one thing I don't, a pretty substantial warranty on the labour, parts a given.
      The company I work for offers Preventative Maintenance Contracts for projected failures, insurance on the work and parts costs money, so IMO. . . . I think you made out pretty good!


      Cheers

    4. The Following 2 Users Say Thank You to JB_Fraser For This Useful Post:

      FlaAveo5 (11-04-2017),MetroMPG (11-05-2017)

    5. #13
      What do you mean there's no turbo? FlaAveo5's Avatar
      Join Date
      Sep 2011
      Location
      Fort Lauderdale,Fla.
      Posts
      393
      Thanks
      129
      Thanked 14 Times in 14 Posts
      thank you for not thinking i was a total dope for spending this money on a professional job...that took me 5 years of searching for the best price,...begging for help on here, to no avail, saved the money by not replacing it all at the 5 year mark.

      So I technically saved $770 from NOT having it done 5 years ago. It now has all new parts, new coolant, but it was only 1 year old, but it is now super fresh. And it's NOT 'DexKill'. IF I had the knowledge to do the work, and had ALL the expensive tools to do the job, easily, like the water pump puller, and 2 floor jacks, Neither of which I could 'Rent or Borrow' from the local auto parts stores, and have no friends that have these tools to loan them to me, or help me.
      The auto parts stores all claim they loan out tools for free! Not these tools. IF I could psychically do the job, (which I cant), I might have tried. BUT the way my luck runs, I would have missed something, or set the timing belt of by 1 'tooth', and it would blow up down the road!

      Plus I have the long warranties. From a local garage with a long very good reputation. I would have loved to have done it for the parts only, but I don't have the knowledge to change it all out, and my burned out knees and bad back make doing this kind of work, next to impossible.

    6. #14
      What do you mean there's no turbo? FlaAveo5's Avatar
      Join Date
      Sep 2011
      Location
      Fort Lauderdale,Fla.
      Posts
      393
      Thanks
      129
      Thanked 14 Times in 14 Posts
      I dont know guy. Depending on the kind of money you make, the type of used cars near you, or if you want to go into debt for 4-6 years for a NEW car,....it is hard to decide. BUT if your trading in, don't do the job, they arent going to look or ask, they will offer you the $300 and shove you into a $25K compact. So why spend all that money on a car your trading in?

      Even this car ...it is fairly a 'new car', and new cars last WAY past 2-400K miles!!, if you do the preventive maintenance. It's not a Toyota, but its not a Yugo either. You are in the rust belt, all that road salt is eating away cars, if yours is NOT rusty, and it looks good, runs good, and isn't a money pit. Keep it. But with another used car, you wont know its REAL repair history, you have to make sure it isnt a money pit itself. You have to pay a mech. to look it over, thats a couple of hundred, if you buy used with no warranty. IF I had the money/job to get a 2 year old Yaris or Corolla or Mazda 2, I would buy one. But I don't. So I keep my Aveo looking new, running like new, and people are always in shock when I tell them it is 11-12 years old! If it dies from something else, I am looking at a motorcycle,or an electric bike!

    7. #15
      The Lowest Static Aveo Melveo's Avatar
      Join Date
      Jan 2016
      Location
      Raleigh NC
      Posts
      256
      Thanks
      0
      Thanked 25 Times in 22 Posts
      I get 20mpg city driving no cat, straight pipe and like a ricer. 40+ mpg on the highway also.

    8. #16
      What do you mean there's no turbo? FlaAveo5's Avatar
      Join Date
      Sep 2011
      Location
      Fort Lauderdale,Fla.
      Posts
      393
      Thanks
      129
      Thanked 14 Times in 14 Posts
      Quote Originally Posted by Melveo View Post
      I get 20mpg city driving no cat, straight pipe and like a ricer. 40+ mpg on the highway also.
      well first person to say they get less than 30+ in the city. Didnt think you could get rid of the Cat. and still have it run without all the lights on the dash lighting up!

    9. #17
      AVEO OWNER
      Join Date
      Apr 2011
      Location
      pa
      Posts
      30
      Thanks
      1
      Thanked 4 Times in 4 Posts
      Your advice kinda mirrors my own thoughts, like you said for what they give for a trade in, I think I will get it changed and hope it lasts another three years or so. So far I have very little rust, but with it being 13 years old and living in Pa, I'm guessing it's only a matter of time until it starts showing up!!!!
      Quote Originally Posted by FlaAveo5 View Post
      I dont know guy. Depending on the kind of money you make, the type of used cars near you, or if you want to go into debt for 4-6 years for a NEW car,....it is hard to decide. BUT if your trading in, don't do the job, they arent going to look or ask, they will offer you the $300 and shove you into a $25K compact. So why spend all that money on a car your trading in?

      Even this car ...it is fairly a 'new car', and new cars last WAY past 2-400K miles!!, if you do the preventive maintenance. It's not a Toyota, but its not a Yugo either. You are in the rust belt, all that road salt is eating away cars, if yours is NOT rusty, and it looks good, runs good, and isn't a money pit. Keep it. But with another used car, you wont know its REAL repair history, you have to make sure it isnt a money pit itself. You have to pay a mech. to look it over, thats a couple of hundred, if you buy used with no warranty. IF I had the money/job to get a 2 year old Yaris or Corolla or Mazda 2, I would buy one. But I don't. So I keep my Aveo looking new, running like new, and people are always in shock when I tell them it is 11-12 years old! If it dies from something else, I am looking at a motorcycle,or an electric bike!

    10. The Following User Says Thank You to glen1 For This Useful Post:

      FlaAveo5 (11-06-2017)

    11. #18
      The Lowest Static Aveo Melveo's Avatar
      Join Date
      Jan 2016
      Location
      Raleigh NC
      Posts
      256
      Thanks
      0
      Thanked 25 Times in 22 Posts
      I have an anti fouler to trick computer whenever its time for an inspection

    12. #19
      What do you mean there's no turbo? FlaAveo5's Avatar
      Join Date
      Sep 2011
      Location
      Fort Lauderdale,Fla.
      Posts
      393
      Thanks
      129
      Thanked 14 Times in 14 Posts
      can ANYONE read that post above??!!!!!

    13. #20
      What do you mean there's no turbo? FlaAveo5's Avatar
      Join Date
      Sep 2011
      Location
      Fort Lauderdale,Fla.
      Posts
      393
      Thanks
      129
      Thanked 14 Times in 14 Posts
      Quote Originally Posted by glen1 View Post
      Your advice kinda mirrors my own thoughts, like you said for what they give for a trade in, I think I will get it changed and hope it lasts another three years or so. So far I have very little rust, but with it being 13 years old and living in Pa, I'm guessing it's only a matter of time until it starts showing up!!!!
      Yea...that road salt will start eating it away, unless you can get under the car, and COVER IT ALL with spray on rubber. It protect metal from everything, i dont think even salt can get through it.
      And it adds a little sound proofing to it. I dont know anything about taking care of a car in the 'rust belt/snow', but I would think if you 'rustproof' it yourself, with a can or two of the rubber spray, and wash off the under carriage with a hose or a car wash in the winter, they are open for do it yourself in winter, arent they? I would think that would reduce the chance of rust big time, if not stop it totally.

      IF your rust is very small, there is a product on EBay, that I buy from England called 'Fertan'....turns out it comes in many sizes now, i just looked on EBay...it converts rusted metal into an inert 'metal', and stops rust. It turns it into a black 'metal' that can be painted or spray over it with the rubber spray. It use to be sold in the US at auto part stores, but I couldnt find it for years. Then I found tiny bottles of this on EBay, but it s all in the UK,or Germany. Probably caused 1 person to get skin cancer or something, and got taken of the market! But the UK and Germany sell it. Just some ideas. Take a look at it, and see if it would stop your current rust issues, and then try to apply the spray on rubber to prevent more. Hey, its a small price to pay to prevent a hole coming through the floorboards! Then you'll get nothing for it...you'll have to part it out on your own when you want to get rid of it!





    Page 2 of 2 FirstFirst 12

    Similar Threads

    1. Timing Belt Alignment Issue
      By twins4406 in forum Engine & Drivetrain
      Replies: 9
      Last Post: 07-29-2014, 01:15 PM
    2. Timing Belt Issue
      By Matmax in forum Engine & Drivetrain
      Replies: 0
      Last Post: 03-26-2014, 03:44 PM
    3. Timing Belt issue
      By JJ Money in forum Troubleshooting and Maintenance
      Replies: 4
      Last Post: 07-02-2012, 04:13 AM
    4. The dreaded timing belt issue
      By faithjr in forum General Discussion
      Replies: 18
      Last Post: 02-17-2012, 06:22 AM
    5. Post Timing Belt Change Issue
      By silvtown in forum Troubleshooting and Maintenance
      Replies: 3
      Last Post: 03-03-2011, 11:55 PM

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •