2010 adding cruise?

[Neon915]

I have searched and searches and can't find out of the DIY cruise setup will work on a 2010? Has anyone had luck with this?

[wylee]

Yes it will work. Follow the wires down from the steering wheel clockspring to the connector in the knee panel. The connections you need to make are on the car side of that connector..

[Neon915]

What color are they at the clock spring and do I have to tap into them at the firewall or anywhere will works? Thanks so much. Don't need to jack up her car shed kill me lol.

[petrified.rabbit]

Most of the 09 + people attached to the wires at the column side of the plug for the clock spring of there about.

I forget the color of the wires off hand, but you should be able to find that hear. it was thoroughly discussed on aveonetwork.

[Daox]

Here is our 18 page thread on it. I'm guessing your answer is somewhere in there.

http://www.aveoforum.com/forum/f94/c...y-thread-7871/

[ls1]

I have searched and searches and can't find out of the DIY cruise setup will work on a 2010? Has anyone had luck with this?

Anyone know the pinout for a 2010? (5spd hatch w/AC)
I've located the connector, but my pin 6 and 7 are different colors.
Looking for the
Cruise Control ON switch output
and
Accelerator Pedal Sensor Signal Return

Otherwise my setup looks like written up elsewhere

Thanks!

[Sidewinder]

Follow this thread for your 2010:

http://www.aveoforum.com/forum/f94/2...install-11769/

I just did it using the same colours and setup as him and it worked, I have a 2010 G3. If you have any questions let me know.