The cruise control DIY thread.

[ClintCart]

Has anyone else done the DIY cruise?. I priced out the cruise control switch from all our local GM dealers and it comes out to a grand total of $38.00!! CDN.
I plan on doing this with in the next two weeks I will let you know how it turns out, any feedback on your cruise control installs would be great.


Join AveoForum to remove ads - membership is free!

[khan4rtist]

its pretty easy, just dont mix up the 2 wires coming out of the little junction box thingy, or your car will run like ****

[y2daniel1981]

Has anyone else done the DIY cruise?. I priced out the cruise control switch from all our local GM dealers and it comes out to a grand total of $38.00!! CDN.
I plan on doing this with in the next two weeks I will let you know how it turns out, any feedback on your cruise control installs would be great.

Too bad it isn't for the 2005...

[ClintCart]

its pretty easy, just dont mix up the 2 wires coming out of the little junction box thingy, or your car will run like ****

Do you remember which one goes where?.
I see it doesn't matter at the switch where the wires go...

[khan4rtist]

no it doesnt, but in the case of the original wires it does....

[ClintCart]

OK....
So you don't know which wire goes where?....
Will the car idle poorly or is it when the engine is under load?, if its the idle will it idle poorly as soon as I hook up the wires?
Thanks.

[khan4rtist]

um, if it doesnt go one way then it goes the other way....u can only mix them up 2 ways.....the car will not accerlerate faster when you press the pedal past half.

[ClintCart]

Part should be here Monday, I also ordered some of those cheap plastic clips that hold the cover on the hatch (push in type), .13 cents each!, I bought ten .

[ClintCart]

So I have it (The switch), I hooked it up quickly useing aligator clips, didn't drive anywhere I just wanted to see if the little green cruise control light would come on, no light...
Should it come on? or maybe I need to take it for a spin?.
I'll get the connectors needed tomorrow to hook it up properly.
I guess I'll have to get crafty makeing a mount for the switch too.

[khan4rtist]

no the light will not come on because there is no bulb in there for the light to turn on


Join AveoForum to remove ads - membership is free!