looking at picking up a new alpine headunit. any comments on how to remove the trim would be appreciated. also what about the wiring harness and install kit.. seems to just be a regular double din opening
looking at picking up a new alpine headunit. any comments on how to remove the trim would be appreciated. also what about the wiring harness and install kit.. seems to just be a regular double din opening
2009 Aveo5 highway yellow mods to come!
http://www.cardomain.com/ride/3163083
my other rides
http://www.cardomain.com/id/flaveo5
How did you get the trim off? I hate to just start prying? I have a 2010 and there seems to be no place to get under it? Need to remove trim to get at the HAVC controls. thanks
put a few pieces of tape on the hvac controls by the seam line, and then stick a plastic putty knife in there and pry it up.
Would anyone know of the wiring in the rear hatch? I did not take it apart but the wiring from the car has two clips on the inside and three in the hatch. Now the problem is that the new wiring in the hatch which is correct for vin# has only two then to all the items in it. So, is this an extra for some thing that I don't have? Should I worry about it? thanks GJ
maybe someone can help with a wiring problem? I am rebuilding a 2010 Aveo5 and the rear hatch (I did not take it apart) has the wiring from the car to the hatch. Now that wire has two ends inside the car and three in the hatch. The hatch wiring two leaving me with an extra pegg tail? Thanks I'll add a few pictures.
rear wiper, squirter, brake lights, license lights, window defroster, power trunk release are what can be there.