How to add signal lights to useless deflectors

[papoelchingon]

The way it looked before the mod.



Remove the grill and remove the three screws for the headlight. 2 screws on top and 1 behind the grill for each headlight. Make sure to disconnect all bulbs before removing.



Drill behind the deflector. apply pressure but not to much or you will break it.



Heres the new hole

I used the parking light sockets from an S10. I couldn't get it to screw on and i did not put any kind of adhesive to keep it attached. I just put it on like that and won't come out because of the wall on the fender.



I spliced the wires into the bottom signal/parking lights. Taped it with electrical tape.



After that you're pretty much done. Put on the headlights and bulbs and then the grill. You're pretty much done.

[papoelchingon]

Don't necessarily have to be sockets with bulbs. You can also use some LED strips or anything you want.

[cool-aveo]

That is a very cool mod. Good job!

[papoelchingon]

That is a very cool mod. Good job!

Thanks. A bit cheesy but I. Think it looks better than no light in there.

[cool-aveo]

Not cheesy at all, I think it makes the front end nicer.