i think it was mentioned by audacity...but you can use the higher compression pistons from the euro x16xe and shim the head to raise the comp more
Printable View
i think it was mentioned by audacity...but you can use the higher compression pistons from the euro x16xe and shim the head to raise the comp more
lightweight pulley and cam grind
Then you have the Peugeot 206 WRC... 300hp... 600lb-ft of torque. I'd prefer to have the best of both worlds :twisted:Quote:
Originally Posted by Audacity Racing
600 psh thats nothingQuote:
Originally Posted by exodus
is the peugeot diesel?
That's the only way I see an engine making this much torque without the hp being just as high....
2.0l turbo charged i4... gasoline. The WRC version was replaced 2 or 3 years ago with the Peugeot 307, though. The regular road going version is about on par with a focus zx3, unfortunately. Although to get the car homologated they were required to release a model similar to the WRC version.Quote:
Originally Posted by AVE0SAM
Here's a picture of the 206... this thing could probably pull as much as an f350... if the chassis allowed for it.
http://www.fantasiamodellismo.com/Pl...wrc%202001.jpg
Quote:
Originally Posted by kirbycope
Did someone say lightweight pulley? As in an underdrive pulley? If someone wants one check out my for sale thread in the for sale section!
how much is freed up from the pulley...
usually 3-7hp, i actually plan on getting it dynoed in the week or 2Quote:
Originally Posted by AVE0SAM