Ultra Racing Chassis Braces for Aveo @ Throwdown Performance

[ThrowdownPerformance]

Looking to tighten up the chassis and ride of your Aveo?



4 Pieces currently available at Throwdown Performance for the Chevy Aveo!

4 Point Front Lower Brace!



Front Upper Strut Tower Bar



19mm Rear Sway Bar / Anti Roll Bar



2 Point Rear Strut Tower Bar / Brace



Do not hesitate to contact us with any questions on here or at sales@throwdownperformance.com!

Also don't forget...Join us on Facebook!

[ThrowdownPerformance]

All PM's replied!

[serega12]

Just noticed that in the picture above they have the two-point front strut bar in a 1.5L Aveo... must be more common over in Malaysia.

[ThrowdownPerformance]

Spoke to UR and we are going to get more of the parts up... I think there's actually a rear bar now for the sedan (not just the hatch).

[reddemonx92]

Finally someone started making something for the sedan. Kinda sucks when you have to custom make things that only fit the hatches.

[Daox]

I'd be surprised if the sedan would benefit from a rear brace. I've done testing in other cars that indicates that the rear deck is strong enough to brace the car to the point where I couldn't detect any movement in the rear strut towers. The hatch doesn't have a rear deck so I can see the benefit though.

[orgkaos]

So, can you give an updated list for us that have the sedan or is (or can) everything listed/shown available for the sedan? [-o<

[ontarian_frog]

I'd be surprised if the sedan would benefit from a rear brace. I've done testing in other cars that indicates that the rear deck is strong enough to brace the car to the point where I couldn't detect any movement in the rear strut towers. The hatch doesn't have a rear deck so I can see the benefit though.

It's easy to see the hatch needs bracing in the rear. The way to do it is to fold the rear seat down, park on an uneven surface and then try to put the seat back up...will not line up very well. Even if there is only an inch or two difference in surface variation.

[ThrowdownPerformance]

Sorry, took me a couple of days to get a response from UR on this one. All bracing with the exception of the rear strut bar should fit the aveo hatch and sedan. The aveo sedan should work with the hatch as well as the sedan -- I think the distance between the shock towers is the same unless it hits anywhere else and then we can get a test fit on this if there is any issue and have it corrected.

Would anyone be able to confirm the distance between the rear shock towers?

[ThrowdownPerformance]

PM's returned!