does anyone want these...

[AVE0SAM]

guaging interest to see if anyone wants the d16 header i bought for the aveo and Ill throw in the polyurethane sway bar mounts and summit racing decals that I got a while back....niether item has been put on the car, but the header will need to be modified to fit on the aveo... also that polyurethane mounts will need to be slightly bent to fit in place of the stock ones. im looking to get $60 plus shipping. the reason for selling is because i need money for a quad and i dont feel like modifying the header because itll lead me to have to get a muffler, which will cost me more money and therefore i wont be able to save money for a quad. Also if anyone is interested, I could possibly modify the header to fit the aveo and then sell it, but the price will be higher

NEW PRICE: $40 plus shipping

[Nemasys]

What exactly has to be modified for the header to fit, i have a guy that can do it but i dont want to spend too much, im still unsure what im going to do

[AVE0SAM]

cut about 2" out of the lower part and weld them back together....then adjust the bolt holes, to do that you can cut the metal tabs on each side end, then weld some flat metal stock on each end so it extends far enough to drill the holes and cover the egr valve on the right side( looking from the front) then just adjust the middle ones with some drilling.

[subachad]

will you take $45 shipped to Vegas (89121) for just the header? If so, I can transfer the $$ to my Paypal today and it should clear around Wednesday.

I already have the polyurethane mounts and HIGHLY recommend you install them. I did it within a month of purchasing the Aveo. Makes it turn in a lot better, but they do squeak when it gets cold.

[AVE0SAM]

will you take $45 shipped to Vegas (89121) for just the header? If so, I can transfer the $$ to my Paypal today and it should clear around Wednesday.

I already have the polyurethane mounts and HIGHLY recommend you install them. I did it within a month of purchasing the Aveo. Makes it turn in a lot better, but they do squeak when it gets cold.

trying to sell them together, and shipping will be too much to let the headers go for $45 shipped...id add the urethane mounts but with my luck they would just cause some kind of problem or squeak alot

[shapinoweno]

pm sent

[AVE0SAM]

these are still up for sale

how much for the header if you modify it

or is it something a good muffler shop can do for less than 75 bucks

[AVE0SAM]

how much for the header if you modify it

or is it something a good muffler shop can do for less than 75 bucks

I know my dad and I could do it for 75 buck but it takes time, which i dont have alot of right now. If i was to modify it, I would probably be selling it for ~225 shipped with the polyurethane mounts

if you could hold onto that thought and the products until about early june if possible id be game on it.