•  
    Results 1 to 5 of 5

    Thread: Typical front suspension clunking..

    1. #1
      What do you mean there's no turbo?
      Join Date
      Oct 2008
      Posts
      282
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts

      Typical front suspension clunking..

      My Aveo, like many other's I read about, has some minor clunking in the front suspension when going over bumpy surfaces, at parking lot speeds.

      Has anyone found the source of the problem.

      Has anyone who's disassembled the front stuts found what's up?



    2. #2
      Lifetime owner
      Join Date
      Sep 2008
      Location
      Pittsburgh
      Posts
      8,013
      Garage empty: add car
      Thanks
      2
      Thanked 170 Times in 141 Posts

      Re: Typical front suspension clunking..

      i think it is either the floating strut mounts (on top) or the control arm bushings (against the K frame).

      but it could be something else. either way the parts are less the $30 each, if you can do it yourself.


    3. #3
      Still love my daily driver
      Join Date
      Dec 2006
      Location
      A Sinful Land
      Posts
      605
      Garage empty: add car
      Thanks
      0
      Thanked 2 Times in 2 Posts

      Re: Typical front suspension clunking..


    4. #4
      What do you mean there's no turbo?
      Join Date
      Oct 2008
      Posts
      282
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts

      Re: Typical front suspension clunking..

      Thanks man, did that stop the clunking?

      Mines been doing this since new, I could have had the dealership change them out if I was still under warranty.

    5. #5
      Still love my daily driver
      Join Date
      Dec 2006
      Location
      A Sinful Land
      Posts
      605
      Garage empty: add car
      Thanks
      0
      Thanked 2 Times in 2 Posts

      Re: Typical front suspension clunking..

      Quote Originally Posted by Monzaveo
      Thanks man, did that stop the clunking?

      Mines been doing this since new, I could have had the dealership change them out if I was still under warranty.
      Yes it did.. but now I need to do the other side. I tried finding a Polyurethane replacement, but it's too small for a link bushing which is what it would need. If someone else wants to try, here are the specs.

      The bolt is 12mm
      Outer Diameter is between 26 and 26mm
      I didn't measure the outer most diameter, shouldn't really matter though
      Width I don't remember off the top of my head... probably about 30-32mm





    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •