Re: Tightening suspension
As far as the mounting points for strut bars/braces - they're all the same on all years/models. As far as links for parts - it depends on what you're actually looking for. If you search the forum for specific stuff (i.e. cold air intake, body kit, hood, spoiler, HIDs), you can find the links to where they're sold. A good place to start is the "Products" section of the forum. And welcome to the site.
Re: Tightening suspension
i would start out with a CAI and then some rims/tires, then possibly a set of springs, that will make a big difference, welcome lol
Re: Tightening suspension
Springs make a bigger difference than tires in general driving, even the crappy oem tires take some abuse before breaking loose.
Stiffening the suspension usually goes in this order:
springs<shocks<tires<swaybars<braces
you can eliminate the first two at once with coilovers.
Re: Tightening suspension
eBay Motors is a great place to find and get some ideas.
Re: Tightening suspension
im looking at springs ,,so far i think H&r are the best bet they give enough drop to help but not enough to jar you around ,,i actually talked to h&r tech and they say they are designed to work with factory shocks.but we all know daewoo shocks are awful i cant afford new ones now .figured id install h&r and go from there.
i may try to use an 18" wheel combo,,after seeing that dudes kalos on here . it looked so sweet
i wish there was more wheel choices,id love to use a weld brand roilite wheel
but cant find no one top redrill it. ive beeged weld they wont drill em n 4x100mm
another sharp looking wheel is the empi vw wheel ,,same story though i cant get em inm a 4x100
a wheel the offset is perfect on is an 05-09 mustang wheel
but same story
im almost tempted to run adapters. but the inch and a quarter they would stik wheels out wont due
we will see ,,the wgheel choice has to b right ,to have a rad car in myu book
i just put on my spoiler tonight its sweet i ended up using the 09/10 style one on my 2010
it turned out perfect and was just 110 painted cleared and shipped
i drilled decklid where factory spots are lol one hole was off qrtr inch off i just kept creeping each side mm at a time
...next is h&r and and some shoes
all my work gang is givn me a tuff time about replacn gt
all they know is i replaced it with an important
lol those honda dudes are gonna rib me hard
but next spring when i retire 06 ill have my mods done and a lil shot of funny gas
im getting excited
Re: Tightening suspension
There are alot of wheel sitions out there and redrilling and such is possibly if the wheel permits.
The empi 8 is only 6 "'wide though I think. Too narrow of a rim for the size.
Re: Tightening suspension
ok lol i just piked up a set of wheels they are kinda what ive been after
im gonna hav to run a small spacer im sure because these are orginally for a scion with a 25mm offset
but at 230.00 shippd i had to hav em
now im thinking a 205/40/17 tire will keep speedo close and allow for h&r drop
what do u think
(and yes ive searched the sizing forum and i sure know less tire means more rim and vice versa )
but theres no susbtitute for someone who has been there
so what do u all think
i should run for a tire size with h/r springs
the wheel dimensions are 17 x 7.5
im gettng mags im stoked
they hav been bumpd around just a lil from storage
ill clean and polish em bright ,,so far ive got the cd player nstalled spoiler is done
now i need h/r's ,,tires ,,ac underhood parts
and tint
and the GIMME 5 badging installd ,,lol yes i had some made its funky
and project gimme 5 is done ,,im gaining
i love ebay
Re: Tightening suspension
So I've decided I'm gonna get the H&R springs. Great thing is I just found out I can get them through my job pretty much at cost! Gonna take me some time to save the money though.
BTW, speaking of wheels, does anybody know what the offset should be?
Re: Tightening suspension
Quote:
Originally Posted by dlc70
now im thinking a 205/40/17 tire will keep speedo close and allow for h&r drop
what do u think
(and yes ive searched the sizing forum and i sure know less tire means more rim and vice versa )
but theres no susbtitute for someone who has been there
so what do u all think
i should run for a tire size with h/r springs
the wheel dimensions are 17 x 7.5
I'm running H&R springs, MSR 17x7.5 wheels with 205/40/17s... No issues to report. No rubbing or anything.