i got a power acoustik amp(OV2-1800) its a 2 channel and i wired it up to 2 Sony Xplods from crutchfield and it just wont work. it has a setup on one side for the RCAs and it has channel 1 and channel 2 inputs and outputs. the channel 1s are lined up across the top and channel 2 is lined up across the bottom. when i cut the car on nothing happens. i can pull the rcas and stick one in at a time but just a little bit and it will make like its trying to do something butr if u push it in all the way it stops. what is my problem. subs are good and its all wired right, the only thing i can figure is that i need 2 sets of RCAs for the amp to work but i aint sure on that. its a weekend and i intend on contacting power acoustik about the amp as soon as i can.