Projectors/Altezza/6000k HID **PICS are up, LOTS of them**

[Nemasys]

I just bought a set of those black projectors and black altezza tail lights you can find on ebay. One of my front headlights is damaged (plastic clear on it is burned and you cant see thru it clearly) So i decided to get new headlights and heck get some tails to match the front haha.

Should receive then in about 2 weeks (echeck paypal takes time to clear )

[thehunterooo]

nice they will look good

[Wolfman AK907]

No new headlights and taillights for 2009...

[Nemasys]

Ohh add a 6000k H1 HID Kit with that I cant wait to see those HID's in those projectors

Hopefully theres a nice light cutoff from the lens, dont wanna blind anyone on the roads.

[Nemasys]

Alright theyre finally installed after quite a few little mods to them to make them fit.

The rear lights i had to use my trusty dremel rotaty tool to modify the socket holders cause you cant use the stock positions, the assembly wont go back in its not deep enough.

The projectors i had to modify the H1 hole the bulb goes thru, the HID bulbs wouldnt fit as they were slightly too big. Took a good 3 hours to modify all the lights and wire everything up.

Looks HELLA nice, way better in person then in pics. Took some pics when i unpacked them, gonna take more pics after i wash the car and more tonight when its dark.

Stay tuned for uploads.

[thehunterooo]

yes i cant wait for them

[Nemasys]

Alright, i took quite a few pics, 16 to be exact so here we go.

Some are a bit crappy, after all these were taken with my cellphone.

Enjoy.

[Nemasys]

Yes the flashers look like crap with the window tint coming off, im sanding them down and going to paint them flat black to match the new lights. Im not using them anymore as i use the flashers in the new headlights.

I also posted a closeup of how low this thing is, go to suspension section. You will see that you cant even fit a finger between the top of the tire and the fender.

[thehunterooo]

looks very good, very very good!!!!!

1. What rails did you use for your seats

2. Were those guage overlays hard to put on?

[Nemasys]

1. Fabbed them up myself using the stock ones plus some square tubing welded together.

2. White faced gauges, very easy to put on, you need to pull the stock cluster off, peel off the stock faceplates (they glued on you just pull on them they come pretty ez) and glue the new ones on and your good to go.