Forged JE Pistons and Rods
Topic: Forged JE Pistons and Rods **UPDATED** (Read 362 times)
Brian5475E
Administrator
member is offline
Littleblueaveo
Joined: May 2004
Gender: Male
Posts: 1,316
Location: Cincinnati, Ohio
Forged JE Pistons and Rods **UPDATED**
« Thread Started on Apr 28, 2005, 3:17pm »
--------------------------------------------------------------------------------
We can make these for you with no problem but we require a sample piston in order to make the blueprints. Once we receive your sample we can make the pistons however you want them. JE has no record of the specifications for this engine to make the pistons without a sample. We have the basic info for this engine ( 1,598 cc 1.6 liters in-line 4 front engine with 79 mm bore, 81.5 mm stroke, 9.5 compression ratio, double overhead cam and four valves per cylinder L91.) But we need the sample for Valve pocket locations, angles, depths, pin heights, etc.
A set of 4 custom JE 2618 Alloy forged pistons with wrist pins and JE Rings is $625 per set and takes approx 4 weeks to build once we receive your sample piston. Any bore size or compression ratio you want...
Add $80 for Total-Seal Gapless rings
A set of 4 Custom Forged 4340 Con Rods is $825 and takes 4-5 weeks
We also need a sample Rod and Rod Bearing to make these for you....
Ship Samples to:
Top-End Performance
JE Pistons
7452 Varna Ave North Hollywood CA 91605 USA
Shipping to Ohio for Pistons and Rods is $20
Thank you ......Steve
Top-End Performance
http://www.TopEndPerformance.com
http://www.ImportCarParts.com
http://www.WeberCarbs.com
Internet and Technical Staff
7452 Varna Ave N.Hollywood CA 91605
818 764-1901 818 764-0155 fax
e-mail: topend@racetep.com
Secure Online Ordering: https://secure.racetep.com/topendorders/toporder.html
Mon-Fri 8:00am - 5:00pm.
We Accept Visa, Mastercard, Am-Ex and Discover Card and PayPal
« Last Edit: Dec 22, 2005, 7:57pm by Brian5475E » Link to Post - Back to Top 67.23.14.128
--------------------------------------------------------------------------------
Nemasys
Nitrous User
member is offline
Speed kills, but you get there faster!
Joined: Feb 2005
Gender: Male
Posts: 948
Location: Ontario, Canada
Re: JE Pistons
« Reply #1 on Apr 29, 2005, 12:56am »
--------------------------------------------------------------------------------
OMFG!!!! Time to bore that little crap engine like mad!!!!
Link to Post - Back to Top 64.230.103.59
--------------------------------------------------------------------------------
Check out my ride at Cardomain!
http://www.cardomain.com/ride/2359460
Brian5475E
Administrator
member is offline
Littleblueaveo
Joined: May 2004
Gender: Male
Posts: 1,316
Location: Cincinnati, Ohio
Re: Forged JE Pistons and Rods **UPDATED**
« Reply #2 on Dec 23, 2005, 5:36pm »
--------------------------------------------------------------------------------
bump for update
Link to Post - Back to Top 64.158.141.216
--------------------------------------------------------------------------------
AveoSam
Administrator
Rice Cooker
member is online
Rev-X
Joined: Aug 2005
Gender: Male
Posts: 3,276
Location: NJ (You got a problem w/ that)
Re: Forged JE Pistons and Rods **UPDATED**
« Reply #3 on Dec 23, 2005, 5:53pm »
--------------------------------------------------------------------------------
sweet deal. they could most likely do the same for the 2.0L from the forenza right?
Link to Post - Back to Top 205.188.116.7
--------------------------------------------------------------------------------
CHECK OUT MY AVEO
http://www.cardomain.com/ride/2224437
EnigmaM4n
Mid Grade Unleaded User
member is offline
Joined: Sept 2004
Gender: Male
Posts: 459
Re: Forged JE Pistons and Rods **UPDATED**
« Reply #4 on Dec 28, 2005, 8:54pm »
--------------------------------------------------------------------------------
not bad Brian.
Link to Post - Back to Top 71.13.218.47
aveosummit
Premium Unleaded User
member is offline
I am looking for a lot of men who have an infinite capacity to not know what can't be done.-H.FORD
Joined: Jan 2006
Gender: Male
Posts: 721
Location: Houston/Baytown, TX
Re: Forged JE Pistons and Rods **UPDATED**
« Reply #5 on Mar 26, 2006, 8:10pm »
--------------------------------------------------------------------------------
Has anyone sent them a sample?
Link to Post - Back to Top 24.160.92.68
--------------------------------------------------------------------------------
C3 CUSTOMS- The Integrated Approach to Car Stereo System Design
JOIN AVEOTUNING
Brian5475E
Administrator
member is offline
Littleblueaveo
Joined: May 2004
Gender: Male
Posts: 1,316
Location: Cincinnati, Ohio
Re: Forged JE Pistons and Rods **UPDATED**
« Reply #6 on Mar 26, 2006, 9:07pm »
--------------------------------------------------------------------------------
you only send a sample when you order a set
Link to Post - Back to Top 72.49.231.138
--------------------------------------------------------------------------------
precisionboost
Diesel User
member is offline
Joined: Feb 2006
Gender: Male
Posts: 166
Location: Edmonton, Alberta, Canada
Re: Forged JE Pistons and Rods **UPDATED**
« Reply #7 on Apr 26, 2006, 8:02pm »
--------------------------------------------------------------------------------
I have a set of JE pistons for my 2.0L and so do a few others from Daewootech.
I don't think anybody has ordered the 1.6L pistons before.
The price on the pistons is fairly normal.... I was quoted very similar prices but I managed to get my set from someone else for significantly less money ( pistons were never used )
The rods are a little on the expensive side...... I had quotes closer to $650 ..... one company I was thinking about getting rods from was Pauter Rods..... they make decent reliable stuff.
Link to Post - Back to Top 68.150.219.124
--------------------------------------------------------------------------------
2004 Chevrolet Optra 5
1990 Passport Optima Turbo (Lemans/ Opel Astra )
1989 Pontiac Lemans
1987 Pontiac Sunbird GT Turbo
1998 Acura 3.5RL
1997 GMC 2500 Suburban
1983 GMC 1/2 Ton truck
2000 Daewoo Lanos
2001 Daewoo Lanos
precisionboost
Diesel User
member is offline
Joined: Feb 2006
Gender: Male
Posts: 166
Location: Edmonton, Alberta, Canada
Re: Forged JE Pistons and Rods **UPDATED**
« Reply #8 on Apr 26, 2006, 8:03pm »
--------------------------------------------------------------------------------
Personally.... if you want higher compression..... get some European X16 pistons.... I think they are 10.5:1
Link to Post - Back to Top 68.150.219.124
--------------------------------------------------------------------------------
2004 Chevrolet Optra 5
1990 Passport Optima Turbo (Lemans/ Opel Astra )
1989 Pontiac Lemans
1987 Pontiac Sunbird GT Turbo
1998 Acura 3.5RL
1997 GMC 2500 Suburban
1983 GMC 1/2 Ton truck
2000 Daewoo Lanos
2001 Daewoo Lanos
