Bringing back from the dead

[xintersecty]

Here is my journal entry for bringing back my 2006 Aveo from the dead.

Issues:
1) Crinkled hood (dear deer)
2) Busted Driver Light and Turn Signal
3) Chevy Badge Radiator inlet busted
4) Various Parts in the front end busted
5) Passenger Side Skirt Crushed (sign sign everywhere is a sign)
6) Front Passenger Door crushed
7) Rear Passenger Door crinkled
Rear Axel Beam Bent

I have a check from the insurance company from the Dear Deer Incident. So I shall go to work

Here is pictures of the current status, the beginning:








Here is the plan:

1) Revive the rear end
a) Used Rear Axel Beam
b) new bushings
c) coil over suspension VW MK2 Golf GTI Coilovers By Raceland
d) paint the drums (color suggestions?)

2) Rebuild the Front
a) Replace the Radiator Front Support: Radiator Support | CarParts

The part is bent causing the hood latch and driver side light to have been pushed back.
b) Replace the hood
c) Put on new head lights 2004 2008 Chevy Aveo Hatch LED Halo Projector Headlight | eBay

I am not crazy about them (has anybody used these before?) and I would like to get something classier. Any suggestions?
e) Put on coil over struts up front (I have Rabbit's kit). See above section

3) Body Work Hell
a) Replace the passenger door
b) beat the rear door and pull our dents
c) work the side skirt and cover it up using after market skirt.

Any suggestions?