took my car to the car wash no it won't start

i left the car wash,got about 500ft to a stop sign and when i when to take off from the stop sign it just putted i had it floored and it went no where.finally after taping a few times it ran again,luckly i got it home.now when i woke up this morning it won't start at all....i was thinking bad gas at first,or water in the intake? anyone have any tips?

i had this problem with my old GEO Storm. it turned out to be a pin hole in the coil wire to the distro. don't know if thats it but you need a set of eye's on you're wires and some one starting the car if you see an arch then that's it. just a guess on you're problem but the Geo did it once.

the ignition block on these cars should be pretty resistant to moisture compared to a distributor... let the engine bay dry out and try again.

thanks guys i found the problem,my e-mange wiring got wet and jumped settings (at least im guessing it jumped settings) but all is fixed now she runs like a champ again:)