•  
    Page 1 of 6 123 ... LastLast
    Results 1 to 10 of 60

    Thread: FS: Aveo Kalos Wave Swift Under Drive Pulley

    1. #1
      Almost time to do my timing belt
      Join Date
      Dec 2006
      Posts
      1,291
      Garage empty: add car
      Thanks
      0
      Thanked 1 Time in 1 Post

      FS: Aveo Kalos Wave Swift Under Drive Pulley

      I will be selling under drive pullies for the 1.6L Daewoo engine starting in January.
      My price will be $200 (USD) for the pulley, the required belt, and shipping to United States and Canada.
      Start saving now because I will start producing these units in January 2007.
      If you wish I will take deposits of at least 25% ($50 USD).
      Send me a PM about sending me money for them or if you have any questions you do not want addressed here
      Since the pullies will be made on individual basis production and shipping should take 3 weeks to a month to the United State, 4-6 weeks to Canada. Time could be extended because of shortages in aluminum supplies or busy-ness of the machiners. If shipping time will be extended I will let you know through PM, email, and/or phone call as soon as I know. Shipping will be done by either Fed Ex or USPS at a later date. I will post that when I decide



      I accept paypal, cashier's check, and money order



    2. #2
      I'll keep it and add a turbo
      Join Date
      Dec 2006
      Location
      Fort Worth TX
      Posts
      190
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts
      May i ask why they are so expensive? You may only get 5 hp gain.
      2006 Chevy Aveo LS Hatchback - getting sold soon
      1996 Dodge Grand Caravan - The daily mommy shuttle
      1998 Lexus SC400
      1988 Toyota Supra - fully built JDM 7MGTE T40 Turbo

    3. #3
      Still love my daily driver Nemasys's Avatar
      Join Date
      Dec 2006
      Location
      Hawkesbury, Canada
      Posts
      862
      Thanks
      0
      Thanked 1 Time in 1 Post
      5hp for 200$ imo is not bad
      > 2010 Mazdaspeed 3
      - Fully built, GT35R, 500+ whp

      > 2004 Hatchback 2.0L Turbocharged [RETIRED]
      - T3/T4 T04E .60 A/R Compressor
      - HKS SSQV, OBX Wastegate
      - FMIC with 2.5" piping
      - Tuned with Megasquirt II v3.57

    4. #4
      Almost time to do my timing belt
      Join Date
      Dec 2006
      Posts
      1,291
      Garage empty: add car
      Thanks
      0
      Thanked 1 Time in 1 Post
      Quote Originally Posted by aveogyrl
      May i ask why they are so expensive? You may only get 5 hp gain.
      That's to cover shipping, production costs of the pulley and the belt needed. Plus a little for me, I'll probably only be making $20 a unit when it's all said and done

    5. #5
      Guest
      Fair price. Oh yeah sorry about deleting on the other forum, I was going through stuff and accidentally deleted a whole section.

    6. #6
      Almost time to do my timing belt
      Join Date
      Dec 2006
      Posts
      1,291
      Garage empty: add car
      Thanks
      0
      Thanked 1 Time in 1 Post
      Quote Originally Posted by Brian5475E
      Fair price. Oh yeah sorry about deleting on the other forum, I was going through stuff and accidentally deleted a whole section.
      That's ok, it wasnt to big of a hassle to repost it

    7. #7
      Guest

      Re: FS: Aveo Kalos Wave Swift Under Drive Pulley

      Quote Originally Posted by y2daniel1981
      I will be selling under drive pullies for the 1.6L Daewoo engine starting in January.
      My price will be $200 (USD) for the pulley, the required belt, and shipping to United States and Canada.
      Start saving now because I will start producing these units in January 2007.
      If you wish I will take deposits of at least 25% ($50 USD).
      Send me a PM about sending me money for them or if you have any questions you do not want addressed here
      Since the pullies will be made on individual basis production and shipping should take 3 weeks to a month to the United State, 4-6 weeks to Canada. Time could be extended because of shortages in aluminum supplies or busy-ness of the machiners. If shipping time will be extended I will let you know through PM, email, and/or phone call as soon as I know. Shipping will be done by either Fed Ex or USPS at a later date. I will post that when I decide



      I accept paypal, cashier's check, and money order
      Hey there,
      Will this fit the Aveo engine? What impact will it have on the engine such as power steering?
      Thanks

    8. #8
      Almost time to do my timing belt
      Join Date
      Dec 2006
      Posts
      1,291
      Garage empty: add car
      Thanks
      0
      Thanked 1 Time in 1 Post
      It'll work with the 1.6 liter aveo engine. It shouldn't effect your power steering much, if at all

    9. #9
      Almost time to do my timing belt
      Join Date
      Dec 2006
      Posts
      1,291
      Garage empty: add car
      Thanks
      0
      Thanked 1 Time in 1 Post
      On January 2nd I am going to the machinest to finalize production details. I plan to start taking orders on the 10th if everything goes well with the machinest

    10. #10
      Almost time to do my timing belt
      Join Date
      Dec 2006
      Posts
      1,291
      Garage empty: add car
      Thanks
      0
      Thanked 1 Time in 1 Post

      NOW TAKING ORDERS!

      Yes, that's right. I'm taking order's now! You must be thinking, "Hey, it's not the 10th yet." Well you're right! I've decided to get this rolling early! And for the month of January 2007 I'm offering a "first batch" sale: $25 off! So for the month of January, when you place an order, you will recieve the pulley, belt, and shipping to anywhere in the USA or Canada for $175 USD! So order now!

      I accept Cashier's check, money order, and PayPal.
      PayPal is prefered.

      PM me or post for attentional information





    Page 1 of 6 123 ... LastLast

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •