I have a 2010 Chevy aveo. I would like to replace the valve cover Gasket, Please help.
Printable View
I have a 2010 Chevy aveo. I would like to replace the valve cover Gasket, Please help.
My google foo is better than your google doo
https://www.youtube.com/watch?v=hR29p71IhSU
Ok.This is pre-mature.I have to make sure my oil leak is the valve cover.I found your video.This is great.A camera on your forehead as you demonstate and narrate.You are a good man to offer help to ignorant folks like me.I can do stuff with help like this.Thank-you.
Thank you. It's not my video but I am good at finding things. Whomever made this you tube, really helped us.
I found this video really helpful when I did mine.
https://youtu.be/lTY17bq6LkM
I replaced the valve cover gasket about 20,000 miles ago and it instantly didn't work. At first it was a slow leak that progressed to leak everywhere (especially the spark plug holes). I just replaced the gasket again and no leaks anyhere. I think the following made the difference:
- REALLY clean the mating surfaces. I used brake cleaner and light sanding with 220 grit aluminum oxide paper to get the metal nice and shiny. I cleaned the valve cover well and let it dry. I followed this by scrubbing the gasket recesses well with rubbing alcohol.
- I used an RTV sealer (Permatex Ultra Black) on all the surfaces. I know one isn't supposed to do this, but I was making damn sure this thing wasn't going to leak. I used a very small bead on most of the surfaces, but a heavier bead on the spark plug holes and in the cam corners. The RTV oozed out slightly in the areas with a heavier application and not at all everywhere else. I had a look inside with my inspection camera and there was no RTV where it shouldn't be.
- I tightened the valve cover bolts using the technique described in the above video (I couldn't find any reference to a GM tightening sequence in my shop manual). Final torque was 89 in/lbs.
While I was doing this repair, I cleaned all the oil and debris out of the spark plug holes and replaced those as well.
I'll report back after a few hundred miles on whether this worked and its still leak free.