How replace the ignition lock cylinder?

I have a 2006 Chevy Aveo LS.

Posted a couple of days ago about a broken key in the ignition. Decided the cheapest solution is to buy a new lock cylinder. BUT I have no idea how to change the lock cylinder.

Has anyone done this? Do I have to remove the steering wheel, and if so, how do I do that?

1. Disconnect negative battery cable.
2. Remove the lower steering column cover panel by removing the screws.
   http://www.aveoforum.com/forum/attac...aveo_g0044-gif
3. To remove the lock cylinder of the switch cylinder housing, press down the detent spring with a 2.5 Allen wrench, or other suitable tool, and pull out the lock cylinder.
4. Remove the ignition lock cylinder as follows:
   
   • Turn the key to the ACC position.
   • Using a 2.5mm Allen wrench, press down the detent spring in the ignition lock cylinder.
   • Remove the ignition lock cylinder.

To install:

1. Install the ignition lock cylinder and remove the key.
2. Install the lower steering column cover panel.
3. Connect the negative battery cable.

Thank you SO MUCH!!! I removed the cylinder and am now waiting on one to arrive in the mail until then the car seems to work fine if i just turn the ignition with a screwdriver!!

thanks!!!!

If yours is an automatic, did you try moving the shifter around and trying to turn the key at the same time? Wiggle it back and forth in Park.

Quote:

---

Originally Posted by Aveo5_boy

1. Disconnect negative battery cable.
2. Remove the lower steering column cover panel by removing the screws.
   http://www.aveoforum.com/forum/attac...aveo_g0044-gif
3. To remove the lock cylinder of the switch cylinder housing, press down the detent spring with a 2.5 Allen wrench, or other suitable tool, and pull out the lock cylinder.
4. Remove the ignition lock cylinder as follows:
   
   • Turn the key to the ACC position.
   • Using a 2.5mm Allen wrench, press down the detent spring in the ignition lock cylinder.
   • Remove the ignition lock cylinder.

To install:

1. Install the ignition lock cylinder and remove the key.
2. Install the lower steering column cover panel.
3. Connect the negative battery cable.

---

I can't turn the key to the acc position. that is why I need to change it.

Will the ignition switch still come out?