Printable View
How do you remove the front door panel on a 2010 aveo LT 4 door. I have the door handle screw and 2 from the panel right in front of the door handle. I dont know how to access any other screws(if there are any other screws for it?) and it still wont come off. Doing this to install new speakers
pull hard? and upward at the same time.
so it does only have 3 screws, even for the 2010 model. I know I read that someone was saying 2009-2010 model are different. Just making sure because I dont want to brake it.
Thanks rabbit
should i be pulling really hard, like feels like it will break kind of hard? Because it is not coming out and id rather not break it.
are you getting the edges loose with a trim tool? kind of like a spatula? go around the edges and pop on to see if that feels like what you are fighting.
I finally got it, probably not the right way but nothing broke and that's what was important. Other door panels I've seen didn't clip in there like the Aveo does. But I come to find out that the speakers I bought don't even fit yet they are 4"s.
I'm stuck in the same boat. I have the 1 screw removed from the pull handle. That's it. I've looked everywhere and I can't seem to find any spot that's removable to find the 2 screws you mentioned in front of the door handle. I don't want to mess this door up. I have a 2010 Aveo5
Ok anyone have a video on this yet i just changed out my rear speakers an about to do the front doors. But not sure how to get the panel off. Any help.
This is a pic from the Chilton Manual for 2009 Aveo5 which I guess is similar to the 2010.
Also there is a thread here regarding front door panel: http://www.aveoforum.com/forum/f94/h...o-sedan-13656/
Thanx im try today an let ya now what happens
Hey I just did mine today I have a 2010 Aveo LT 4 door an there is only 1 screw I had to take off. It was on the door handle the rest was just snap screws I beleave you call them. Ok an I also put 5 1/4 speakers in the door as well the 4 that they say fit to small. You just have to mod the spacer thing and there you go. This is also youtube video I did.https://www.youtube.com/watch?v=TOJgnoohjl0 hey hope it helps.
Attachment 6258Attachment 6259Attachment 6260Attachment 6261Attachment 6262Attachment 6263Attachment 6264Attachment 6265