10 Attachment(s)
Aveo irmscher changing the air filter of proflow cai
JUST 10 EASY STEPS TO CHANGE THE AIR FILTER OF COLD AIR INTAKE. Hopefully useful !!
1.- Loosen the wheel nuts
Attachment 4817
2.- PUT THE CAR JACK IN THE CORRECT PSICION TO LIFT THE FRONT WHEEL
Attachment 4818
3.- ONCE LIFTED THE CAR REMOVE THE THE WHEEL NUTS AND REMOVE THE WHEEL
Attachment 4819Attachment 4817
4.- REMOVE THE 3 SCREW TIP AND ONE NUT (2 SCREWS ARE BELOW AS SHOW)
Attachment 4820Attachment 4821Attachment 4822
5.- REMOVE THE COVER FROMTHE FENDER -STEP BY STEP AS SHOW-
Attachment 4823Attachment 4824
6.- LOOSEN THE CLAMP AIR FILTER TO REMOVE THE AIR FILTER
Attachment 4786 Attachment 4787
7.- LOOSEN THE AIR FILTER CLAMP TO REPLACE IT (BE READY THE NEW ONE)
Attachment 4788 Attachment 4789 Attachment 4791
8.-PROCEED TO PUT ALL IN REVERSE ORDER (AS SHOW)
Attachment 4792 Attachment 4793 Attachment 4794 Attachment 4795
9.- INSTALLING THE WHEEL BACK AND GENTLY TIGHTEN THE NUTS CROSS FOR BEST FIT MESH
Attachment 4796 Attachment 4797 Attachment 4800 Attachment 4801
9.1 .- IF USE A LOCK WHEEL TIGHTEN NOT TOO
Attachment 4802
10.- PUT DOWN THE CAR AND TIGHTEN TOTALLY THE NUTS CROSSED WAY, CLEAN AND SHINE THE TIRE AND READY!!!
http://www.aveoforum.com/forum/attac...i-dsc04783-jpg http://www.aveoforum.com/forum/attac...i-dsc04782-jpg