typical aftermaket rim centterbore? is 4x100mm rim compatible with 4 on 4" lugs

time to get new rims for the aveo - so its 38mm offset, 56.6mm centerbore, 4x100 for the stock steelies i believe. i really like the 14" kosei k1 ts for its low weight and currently want to go with them but it appears they are 5 lug bolt pattern, so something similar i guess. now heres the funny part bear with me - i want to match the rims on my car to the ones on the aluminum trailer i am building and the half axles have a hub thats 4 on 4" with a 62.74mm centerbore so two questions arise for me 1) is 4x100mm the same/compatible with 4 on 4"? I called five shops and couldn't get a straight answer - now if you do the math 4 on 4" is actually 101.6mm, 1.6mm longer on the diameter so thats .8mm on the lugs which i assume could be within tolerance but i'm looking for corroboration on this forum from someone who perhaps has worked with trailer hubs. 2) are most aftermarket rims with a larger centerbore than 62.74? lastly, since trailer wheels are usually zero offset, i'm looking at using 1 1/2" 4x100 wheel spacers which i need to make sure will fit on the 4 x 4" hub (they wouldn't put in longer studs i asked). the half axles arrive in a week or so so i can start test fitting then.. just looking to the forum for input/constructive criticism

based on experience, you can install some 5x114.3 on a 5x112, and some 5x5 on 5x130. The 4s, you can do the 4x98 onto a 4x100. So those is 2 mm versus 1.6mm So it should work.

To do it "properly" you will need the appropriate seat wobble nut.. the conical seat is like a floating washer on the threaded portion of the nut.. like so:

Wobble Nuts PCD Variation lugs 12x1.5 12x1.25 | KLUTCH REPUBLIK

hopefully you could find them cheaper, thats just an example.

Half axles should be here next week to test fit some wheel adapter spacers and several 4x100 aftermarket rims - Rabbit, not only have I not found any other supplier, but not even anyone who knows what PCD Variation Lugs are! I'm gonna try a Fiat aftermarket club next or just use the supplier you mentioned.

im gonna go with a 4x4" to 4x100mm adapter. this is because the half axle studs have 20 threads per inch which would require custom made wobble nuts, they are a great hubcentric way to mount, just doesn't work with the 1/2-20 lug bolts so two options, cut the bolts off and pay a shop to redrill, or use a spacer adapter