4 NEW 16x7 4x100 Konig Candy Wheels/Rims | eBay
these are calling my name.
anyone know if the offset would cause problems?
idk how much it varies with rim diameter..
Printable View
4 NEW 16x7 4x100 Konig Candy Wheels/Rims | eBay
these are calling my name.
anyone know if the offset would cause problems?
idk how much it varies with rim diameter..
Since the rims are only 7 inches wide, you shouldn't have any problem with the offset, My last wheels were 8 inches wide with a 30 offset and didnt give me any troubles. Best of luck to you, sir.
on the bottom of the page, it allows to enter the vehicle make/model/year.
it says that it wouldnt be compatible, but unless it was the offset, i dont see
what would make that true.
these should fit fine, provided the spokes clear the caliper, which most likely would only require a 5mm spacer at most..
@dumptaveo how did your 8" and 30 offset wheels look up front ? I'm lookin at some 15 x 8 +25 kinda skeptical on them though
I forgot about clearing the calibers, Good stuff rabbit.Quote:
Originally Posted by petrified.rabbit
so guys. i think im gonna go with your word on it.
good name, good price,
good looking, theyre pretty dead on to what i was looking for.
i appreciate both of your imput.
I demand pictures when you get them put on.
so. i got the rims, came in after 2 days. good stuff.
slapped on some tires and put em on with
just enough time to be late to work today.
it looks very sexy.
too dark today for any pictures tonight, but soon.
looks nice, could used lowered :P but i like it.
is your hood up?
thanks,
already got a deal for some springs pretty soon.
but no, the hoods slightly bent.
its only noticeable from certain angles.
not too bad for me to be in a rush to
buy a new one yet.
hi there, i am on craigslist, looking for rims, there are lots of 15x7 or 16x7
if the rim is 15x7, how wide the tires shall i get? if i go with 185 55 15 factory size, will the rims be looking like wider than the tires?
and what kind of offset shall i look for ?
if that owner let me test fit the wheels, if it LOOKS ok, then its fine ?
i am soooo need to get rims,,,,, but i wouldnt pay for brand new ones,,,,, and i dont know how to get proper ones,,,
please help me out, mang.
the 7" wide rims will need different scale tires, i took mine into pep boys to figure out the specific size i wanted.
if you test fit the rim and itll spin without hitting the caliper or anything, you should be good with the offset.
just look for bolt pattern 4x100,
probbly 15-17 inch rims,
from 6.5-8 inch wide.
as far as fitting onto the hub, most aftermarket will work,
as well as any other with a hub larger than the car's(56.6)
youll want hubcentric rings, which you can get pretty cheap
as long as you know the size of the hub hole(<--proper term?) on the rim.
or you could take it into any shop and theyd probbly tell you.
this is my first car, and the first set of rims ive bought, so im relatively new to this myself.
if appreciate if anyone would correct me if any of that above is inaccurate.
thats correct, but its hub center bore, not hub hole.
do i really need the center bore spacer if the center bore of the wheel is bigger than the car's center hub ?
i am looking into a set of wheels he said it was used on a vw.
i had differenct wheel on an astro, the center bore is a lil bigger than the hub it was fine ?
15x7, can i use 185 55 15 ? will the rim look wider than the tire?
if you have the vw hub rings, youll be good enough to be ok. just get 195/50r15 tires..
convert the mm to inches and if less than rim width, it will appear narrow.