Printable View
Hi everyone, first post here,
I just tried replacing the front brake rotors and pads on an 04 Aveo. On one side the caliper piston was so hard to compress I couldn't put the new pads in. The other was pretty hard to compress as well, I actually messed up a C-clamp. Is this a sign of a bad caliper? Should I try again with the bleeder valve open? All the threads I've read about this on the forum didn't mention the bleeder valve. Thanks in advance.
Martin
You can't do it with a c-clamp. You need a suitable tool to compress the piston without ruining anything while depressing the piston.Quote:
Originally Posted by airegin
No, it's the same with all disc brake cars. It's always hard to depress the cylinder piston because you need to force the fluid in the sealed hydraulic system to move. Using a very large set of slip joint pliers, carefully placed against the back of the caliper and the front edge of the piston will do the job.Quote:
Is this a sign of a bad caliper?
No, there is no need to open the bleed valve. But you might want to open the lid of the brake reservoir and put a rag under it - because when you finally do depress the cylinder piston the fluid will go back into the reservoir. If you added any brake fluid over the time that the pads were wearing down it compensated for the pads being worn. When you push the piston back to accommodate the new pads it will send any excess fluid back into the reservoir, and it might overflow.Quote:
Should I try again with the bleeder valve open? All the threads I've read about this on the forum didn't mention the bleeder valve. Thanks in advance.
Martin
This guy seems to know what he's talking about, so I'd trust his word.
Although, I was able to get mine done with a C clamp pretty easily. Then again, my brakes weren't really that bad anyway.
Best of luck to ya!
Thanks for the responses. Somehow I can't see how the pliers would work differently than C-clamps. I've seen the tool you talk about, but assumed it was necessary only when the piston needs to rotate while it compresses.Quote:
Originally Posted by Thymeclock
I say get the $8 caliper tool..
http://www.blurtit.com/var/question/...e_caliper_tool
If the car has ABS, it's best to crack the caliper bleed while depressing as forcing any, possibly contaminated, brake fluid back through the ABS unit could damage the delicate seals within the abs unit.
Quote:
Originally Posted by pr.noithat
Yeah that... :confused:
I usually just use C clamps and game over...
Has anyone had to replace their calipers? If so after how long... I think the time's coming for me.