Printable View
I would like to install LED lights into the foot wells of my 2007 Aveo5 ls. I would like them to come on and off with my dome light. I really don't want to install a switch. I have searched the forum but cant find a straight answer on how to do this. Pictures and Feed back would be great. Thanks!
Tap in to the center piler button, the blk rubber button on the center piler. Controls the done lights.
The "hold" button? I thought that locks the car in a certain gear.
Ok I did not say consol. I said center Piler the post at the door ( at the center of the car If you take of the inner panel find the wire clip tie in to it. the rubber push button that the door closes on. ( where the tire size tag is but up higher you will see a small rubber flattish button).
Okay thank you. Sorry for the misunderstanding.
Your Welcome. Do not forget to show pic's set up after you finnish.
Domelight supervision wire is what you are looking for.
Shows 12 volts when all doors are shut and goes to ground when a door is opened. To utilize this you can get a SPDT relay, wire it up to reverse polarity and turn on your led lights.
85: ground, 86: domelight wire, 30: 12v, 87: 12v output to leds