4 Attachment(s)
How to remove the protected fuse
Quote:
Originally Posted by
PittViper
Well, I figured it out!
To get this fuse out, here is what you do:
1. Pull the fuse holder out half way.
2. Now you can see the back two prongs of the fuse. With a small screwdriver, gently "push" the fuse out one side at a time from the BACK.
3. Now the fuse should be sticking out enough to grab with small pliers. Grab and pull it out.
Mine was blown, so I replaced it.
Viper
Ok, that was. Confusing!
yes pull the black or yellow in my case fuse protector out. The pop the little protector off. Mine was for some reason facing the front and I had to yank the entire thing off to see the tab. Then you can slide out the fuse to check it and replace it.