does anyone know if the front headlight assemblies can be disassembled for cleaning? Mine are starting to accumulate dirt and dust inside the lenses. Any help would be greatly appreciated.
Printable View
does anyone know if the front headlight assemblies can be disassembled for cleaning? Mine are starting to accumulate dirt and dust inside the lenses. Any help would be greatly appreciated.
Yes they are. I just went through this.
This is what I did. I had to heat my oven to 200 degree's. I popped one headlight assembly in there for just under 10 minutes. Very hot to the touch. like a hot potato, but not so hot I couldnt handle it carefully.
Once warmed up the tabs become flexible and will pry away from the stops. (oh also be sure to remove metal clips (easy) before heating)
pry the tabs up and the glue holding the lens to the housing together will be soft enough to ooze apart. There may be one philips screw to remove in the back before hand too. Dont move the headlight adjusters.
be carefull if you try it, and use my advice at your own risk