Water pump housing

[JVZL1]

Doing a head gasket on my sons 2009. Took the belt of the power steering and the pump dropped off.
The housing that that the water pump and power steering is broke. I'm not sure but I thinks the bolts that
were used were to long.

I'm I screwed? It looks like it is part of the block.

Thanks for any feed back.

[Eg.h2o]

Should be part of the oil pump housing.

[JVZL1]

Thanks you for the info.

[JVZL1]

So weighing the cost of repair with the over heating I have found a used engine with 78K. Shipped to me for 1750.
I will say LQK has been a great company to work with.
Can some one please give me the proper bolt MM size and length for the power steering pump.
Thanks JV

[Eg.h2o]

That info I don’t have. Just measure the blind hole depth and the water pump hole depth and get a bolt slightly shorter. Find any bolt laying around that has the same pitch and thread to use as an example when you go to the hardware store.

best info I can give you…..

[EAD15]

Rock Auto to the rescue (for power steering pump bolt info). Just read the description and find one like it from your local supplier
https://www.rockauto.com/en/catalog/...ing+bolt,11358

[JVZL1]

Well appreciated

[sjcleckley1]

when you get your new motor, I'd recommend replacing the seals front crank and rear main and possible the gasket behind the oil pump/water pump housing and timing belt and the oil cooler seals while it's out and do not use anything from China

[JVZL1]

Thanks will do.