•  
    Results 1 to 5 of 5

    Thread: wat can i buy for my aveo's stock engine

    1. #1
      Should I keep it?
      Join Date
      Mar 2007
      Posts
      48
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts

      wat can i buy for my aveo's stock engine

      ok well ive posted on here a few times about swapping out engines and stuff and i guess from wat ive read its not that hard but not really worth my time considering in 3 years i will probably get something alot faster however i still would like to add soem decent horsepower to my car so with that being said i think it would be helpful to all on here to post up the links or were i could go to find different parts to increase hp on our engines cams, headers, intake, pistons rods, watever can give us more power post the link on here !!



    2. #2
      Still love my daily driver
      Join Date
      Dec 2006
      Posts
      536
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts
      http://gravanatuning.com for intakes... and... well... that's about it.

      Exhaust you'll need custom made, muffler you can get anywhere...

      cams are in the works, I think... sometime this summer if I recall correctly.
      Horsepower is how fast you hit the wall. Torque is how far the wall moves after you hit it.

    3. #3
      Almost time to do my timing belt
      Join Date
      Dec 2006
      Posts
      1,291
      Garage empty: add car
      Thanks
      0
      Thanked 1 Time in 1 Post
      underdrive pulley... production temporarly suspended

    4. #4
      Almost time to do my timing belt
      Join Date
      Dec 2006
      Posts
      1,524
      Garage empty: add car
      Thanks
      0
      Thanked 1 Time in 1 Post
      depends on how well you work with tools and if you can modfiy stuff....you can get dve headers for like 300 or get a d16 header for 60 bucks shipped and modify that to fit the aveo....theres a bunch of threads on how to build your own intake from either a gsr intake kit or from a civic one (cost < $75).....another thing you could do is find some higher compression pistons from the euro 1.6L

    5. #5
      Still love my daily driver
      Join Date
      Dec 2006
      Location
      Auburn, Washington
      Posts
      662
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts
      yeah ebay intakes and custom cutting them are the best imo....i used the GSR....it was 35 shipped all i had to do was cut it twice and drill or the sensor and BAM it was in. lol






      CarDomain
      For mods visit my CarDomain.

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •