Printable View
2004 Aveo 1.6
I’m going to drop the pan tomorrow, and I understand that the original pan gasket is a type of RTV. I am planning on using PN 90409693 which looks to be a fiber type gasket. Any words of wisdom? Should I just use RTV instead of the gasket?
I dont see a problem using an actual gasket. Just make sure you clean all mating surfaces well
Oil pan gasket replacement has been deemed a success! All nice and clean with no drips or seepage present anywhere after a 50 mile round trip this evening.
Awesome I didn't know they made gaskets for these.
I have a 2011 1.6 with automatic tranny.
Will this gasket fit?
https://www.sears.com/dts-new-oem-oi...y/p-A034149589
Do you have a link of yours?
Thanks
https://rover.ebay.com/rover/0/0/0?m...2F122259301028
should fit no problem as the oil pan is the same. One word of caution though. Using an actual gasket means the pan will be slightly farther away from the block when all is said and done. This caused two of the oil pan bolts to not engage the block threads enough. The two bolts were on the oil pump so I bought longer ones at a hardware store.
Awesome thanks. Never saw this before as I thought they didn't make them. All had RTV from the factory. Thanks for the thread!Quote:
Originally Posted by Eg.h2o