CUSTOM CAI PONTIAC G3 ECOtec 1.6L...

Custom CAI.

I commented that I tried to install the AEM CAI designed for the engine E-TECII, however failed, I put the installation.

hoses and tubing for filter minder ...

http://i4.photobucket.com/albums/y13...3/123_0001.jpg

Gates hose I found, near the cm linear 1USD ...

http://i4.photobucket.com/albums/y13...3/123_0005.jpg

The filter 500-A0028 Apexi

http://i4.photobucket.com/albums/y13...3/123_0006.jpg

http://i4.photobucket.com/albums/y13...3/123_0007.jpg

Became a polishing base, to improve flow.
o
http://i4.photobucket.com/albums/y13...3/123_0008.jpg

The interior finish was similar to the outside

http://i4.photobucket.com/albums/y13...3/123_0009.jpg

The AEM filter minder

http://i4.photobucket.com/albums/y13...3/123_0010.jpg

The pod for the engine bay.

http://i4.photobucket.com/albums/y13...3/123_0011.jpg

Do not read Japanese ...

http://i4.photobucket.com/albums/y13...3/123_0012.jpg

http://i4.photobucket.com/albums/y13...3/123_0018.jpg

Now the filter

http://i4.photobucket.com/albums/y13...3/123_0022.jpg

http://i4.photobucket.com/albums/y13...3/123_0025.jpg

http://i4.photobucket.com/albums/y13...3/123_0020.jpg

http://i4.photobucket.com/albums/y13...3/123_0021.jpg

http://i4.photobucket.com/albums/y13...3/123_0026.jpg

Armed and here ...

http://i4.photobucket.com/albums/y13...3/123_0028.jpg

The AEM CAI 21-537 ...

http://i4.photobucket.com/albums/y13...3/123_0031.jpg

I had to close a pair of pipelines, the MAP sensor ...

http://i4.photobucket.com/albums/y13...3/123_0035.jpg

And the return of the engine head.

http://i4.photobucket.com/albums/y13...3/123_0036.jpg

As intended to stay ...

http://i4.photobucket.com/albums/y13...3/123_0037.jpg

Installing the filter minder terminal ...

http://i4.photobucket.com/albums/y13...3/123_0039.jpg

We removed the OEM filter ...

http://i4.photobucket.com/albums/y13...3/123_0040.jpg

http://i4.photobucket.com/albums/y13...3/123_0041.jpg

http://i4.photobucket.com/albums/y13...3/123_0042.jpg

http://i4.photobucket.com/albums/y13...3/123_0043.jpg

OEM filter bottom of withdrawal by the fender ...

http://i4.photobucket.com/albums/y13...3/123_0044.jpg

View of CAI at the bottom ...

http://i4.photobucket.com/albums/y13...3/123_0045.jpg

First mistake, do not go through the FSTB ...

http://i4.photobucket.com/albums/y13...3/123_0046.jpg

Plenty of room left over to make it, so I immediately opted for Plan B, I took few photos, had a U-tube aluminum 2 "so that was enough to cut a piece to 2/3 parts of the u, retired the banks and rode the MAF, silicon adapters from 2.5 to 3 ", trying to stay focused ...

http://i4.photobucket.com/albums/y13...3/123_0047.jpg

Maf removed the engine as possible, hoping to have less heat, and seems to have a significant change to the position of OEM ...

The party was out of thoortle body, cut to 2/3 of the U-tube ...

http://i4.photobucket.com/albums/y13...3/123_0048.jpg

At the other end of the descent to filter ...

http://i4.photobucket.com/albums/y13...3/123_0049.jpg

Note my face of frustration, it is noteworthy that in attempting to install the AEM CAI, it took me all day Saturday without success and custom CAI, incluyenbdo cuts and presentation, I did it in two hours, with all settings.

http://i4.photobucket.com/albums/y13...3/123_0050.jpg

The custom CAI at the end

http://i4.photobucket.com/albums/y13...3/123_0052.jpg

With the AEM filter minder in your pod ...

http://i4.photobucket.com/albums/y13...3/123_0055.jpg

The end result ...

http://i4.photobucket.com/albums/y13...3/123_0056.jpg

I missed desués washing, but I had to make adjustments, change coolant hoses and then wash the engine, as I Fujas and working fluid in the AC Delco center I did not like, cleaned to remove the odor.

The sound is supreme, excellent, you feel the car with more power, the Dash Command throws me a reading of 36 ° C at the inlet ...

I hope you enjoy it ...

Bump, i see the pics now...

Nobody comment in my thread :(....

very nice work.

Thanks!!!!!

Looks cool and do you feel diference??

Yes but i also have a 2" direct exhaust...

I´m gonna install the bypass, because is rain time...