Yeah, the cams run about 300 each and the pulleys about 100 each
Printable View
Yeah, the cams run about 300 each and the pulleys about 100 each
thats not bad at all
And when can these be purchased? lolQuote:
Originally Posted by Audacity Racing
We'll find out mid-summer. I'm going to put them all through their paces quite heavily to see if we need the spring kits too
fill me in here...
what kind of gains are you expecting from something the cost of a turbo?
is this meant for an all motor setup, turbo or both?
thanks
so will we need 2 cams and two pulleys? so that would make the total $800?Quote:
Originally Posted by Audacity Racing
Quote:
Originally Posted by kirbycope
These are meant for all-motor applications. The idea is that with a lightweight flywheel, cams, and a nice set of springs you'll net a good 50-75 whp
No, that's a set. Sorry for the confusion.Quote:
Originally Posted by AVE0SAM
[quote=Audacity Racing]Quote:
Originally Posted by kirbycope
These are meant for all-motor applications. The idea is that with a lightweight flywheel, cams, and a nice set of springs you'll net a good 50-75 whp
No, that's a set. Sorry for the confusion.[/quote:3nffjs6g]Quote:
Originally Posted by AVE0SAM
Oh good, I was thinking it probably was for the set, but now I'm glad that it's been clarified. Once you get the testing done I'll probably be very interested. You'll also have to do a how-to/write up on the installation process
I have a guy here who'll make the flywheels, as for price he needs a stock flywheel to look at first, so if anyone wants to send me a stock flywheel I'll give you a discountQuote:
Originally Posted by Audacity Racing
http://cgi.ebay.com/ebaymotors/FLYWHEEL ... enameZWD1V
Flywheel for "2004-2006 Manual" $40+ s/h
so does that leave poor me with an automatic tranny out of this one?