-
Timing
I have a 2011 aveo⁵. Head gasket was bad so I took it apart. The head needed cut. It took about .030" to clean it up. Put in a new head gasket ND timing belt. I got it running but idle is rough. I push the gas and after coming off of idle it runs great. Any suggestions? I did have the cam pulleys off to cut the head. Also bought the tool to line them back up.
-
-
Ok. What do you mean by that?
-
1 Attachment(s)
Idle air control motor.
It’s on the back of the throttle body.
could be bad…or unplugged (maybe forgotten when you put everything back together), fuse blown….Attachment 12307
-
I will check. I think the throttle plate is controlled by that same plug but I will check to make sure and check for any fuses as well. Thank you.
-
Disregard my suggestion. I now know that a 2011 does not have that valve.
sorry….
-
That's fine. Thank you anyway. Being I took that much off the head, I'm hoping from what I've read it just has to relearn idle.