•  
    Results 1 to 10 of 10

    Thread: DashDyno and ScanGauge II or Other Gauge

    1. #1
      I'll keep it and add a turbo
      Join Date
      Jul 2007
      Location
      Ephrata Washington, United States
      Posts
      196
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts

      DashDyno and ScanGauge II or Other Gauge

      http://www.auterraweb.com/

      I currently am using a ScanGauge II, do you think this would be alot better?

      ScanGauge II:
      http://www.scangauge.com/

      This is it in my car:






    2. #2
      Timing belt broke, do I keep it?
      Join Date
      Jul 2007
      Location
      Chicago IL
      Posts
      3,100
      Thanks
      0
      Thanked 2 Times in 2 Posts

      Re: DashDyno and ScanGauge II

      buy a NEO or a DTEC, u can read all that **** and adjust things respectively. i use a NEO and my AutoXray inconjunction with eachother and i get pretty decent results.
      You can not commit crimes in a Aveo. Its just not fast enough.


    3. #3
      I'll keep it and add a turbo
      Join Date
      Jul 2007
      Location
      Ephrata Washington, United States
      Posts
      196
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts

      Re: DashDyno and ScanGauge II

      Quote Originally Posted by mikedudley17
      buy a NEO or a DTEC, u can read all that **** and adjust things respectively. i use a NEO and my AutoXray inconjunction with eachother and i get pretty decent results.
      Links?

    4. #4
      Timing belt broke, do I keep it?
      Join Date
      Jul 2007
      Location
      Chicago IL
      Posts
      3,100
      Thanks
      0
      Thanked 2 Times in 2 Posts

      Re: DashDyno and ScanGauge II or Other Gauge

      You can not commit crimes in a Aveo. Its just not fast enough.


    5. #5
      I'll keep it and add a turbo
      Join Date
      Jul 2007
      Location
      Ephrata Washington, United States
      Posts
      196
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts

      Re: DashDyno and ScanGauge II or Other Gauge

      ok, but what about for a "simple" install device that just uses the OBDII plug for monitoring (mountable in car) ?

    6. #6
      Timing belt broke, do I keep it?
      Join Date
      Jul 2007
      Location
      Chicago IL
      Posts
      3,100
      Thanks
      0
      Thanked 2 Times in 2 Posts

      Re: DashDyno and ScanGauge II or Other Gauge

      actually what i like about the auto xray is that you can plug and unplug it whenever, u can check ur CELs, and if you really wanted to, u can use velcro and put it somewhere. its a great OBD II scanner. u can also see ur fuel trims, what ur voltages are of certain sensors like ur O2 and u can see how advanced or retarded ur timing is, temps, blah blah blah. basically u can check alot of ****. u can also clear ur own CELs and such. then when ur all done, pack into nice lil case and put in trunk or garage.

      edit:
      Autoxray 6000 scan Collects All Values from Vehicles On-Board Computer.
      FREE INTERNET UPDATES
      Supports multiple trouble code requests, generic codes (mode 3), pending codes (mode 7), enhanced codes (mode 13).
      On-screen definitions of OBD I trouble codes, OBD II generic and OBD II manufacturer specific codes.
      Detects OBD-II Freeze Frame Information.
      Displays Readiness Test Status.
      Displays O2 Sensor Test.
      Test Results (mode 6).
      Vehicle ID (mode 9).
      Set Measurement Units in SAE/Metric.
      Live Data Stream Monitoring.
      29 Frame Capture Mode.
      Set Capture Frame Interval from 0500ms to 5000ms.
      Reset Check Engine Lights.
      Quick Step Data Navigation.
      Customize Data Views.
      Internet Upgradeable.
      You can not commit crimes in a Aveo. Its just not fast enough.


    7. #7
      Should I keep it? Bigs's Avatar
      Join Date
      Mar 2008
      Location
      Gatineau, QC, Canada
      Posts
      87
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts

      Re: DashDyno and ScanGauge II or Other Gauge

      I'm looking to buy a ScanGaugeII and wondering where is the plug? Is it where most are near the steering column?
      2008 Aveo LS Sedan Manual - Flame Red
      Detailer at heart!

    8. #8
      I'll keep it and add a turbo
      Join Date
      Jul 2007
      Location
      Ephrata Washington, United States
      Posts
      196
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts

      Re: DashDyno and ScanGauge II or Other Gauge

      yes, just under the lip of the dash in the center.

    9. #9
      Almost time to do my timing belt ontarian_frog's Avatar
      Join Date
      Dec 2006
      Location
      Fredericton, NB
      Posts
      1,381
      Garage empty: add car
      Thanks
      0
      Thanked 10 Times in 7 Posts

      Re: DashDyno and ScanGauge II or Other Gauge

      Quote Originally Posted by Bigs
      I'm looking to buy a ScanGaugeII and wondering where is the plug? Is it where most are near the steering column?
      yup. below driver kick panel, a little to the right. there is only one.
      I leased Pontiac Wave from September 2006 to August 2011.

    10. #10
      Should I keep it? Bigs's Avatar
      Join Date
      Mar 2008
      Location
      Gatineau, QC, Canada
      Posts
      87
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts

      Re: DashDyno and ScanGauge II or Other Gauge

      Thanks guys!




      2008 Aveo LS Sedan Manual - Flame Red
      Detailer at heart!

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •