Need some help what are the steps to unhook the fuel injection. been looking for videos but no luck. thank you for the help.
Printable View
Need some help what are the steps to unhook the fuel injection. been looking for videos but no luck. thank you for the help.
If you still need the info there is a quick coupler where the fuel line meets the injector rail. You need a special tool to release it by pushing the fuel line towards the rail and inserting the release tool and pushing it towards the fuel line. Make sure you take the pressure off at the shrade valve, looks and works like a tire valve stem in the same area.
No need to disconnect any fuel lines. You'll need to disconnect the wiring harness from the injectors and sensors (be careful as the connectors may be brittle). Then just flip the harness out of the way. When replacing the head, be sure not to snag any wires.