Passenger side window not working - baffled please help

[Brit01]

Bit stuck on pinpointing the issue now.

Front passenger window not going up or down.
Actuator Motor works as I tested it with an external 12v power supply.

Drivers master switch for passenger does not work, Pasenger switch does not work.

I removed a passenger rear switch which I know works and tried that but also did not actuate the window.

continuity on the passenger switch appears ok.

If the passenger switch on the drivers master control is broken will this disable the passenger switch also? (i.e they are not independent circuits)

A new drivers switch is not cheap so don't want to be throwing money at it.

Not sure how to test te master drivers switch due to all the pins.


Please help

Thank you

[EAD15]

Here's a wiring diagram for the 09 Aveo5 in the US but I imagine the general logic is the same regardless of model year. Trace out the flow for pressing the window switch at both driver master panel and passenger switch and see where they have common paths. Somewhere in there will be the problem if both aren't working.

[Brit01]

Here's a wiring diagram for the 09 Aveo5 in the US but I imagine the general logic is the same regardless of model year. Trace out the flow for pressing the window switch at both driver master panel and passenger switch and see where they have common paths. Somewhere in there will be the problem if both aren't working.

Many thanks

Got it sorted finally. Was a connection to an aftermarket alarm module that was fitted by the previous owner/supplier!! Colour coding was a nightmare, all mixed up so had to strip all the electrical tape they had wrapped everything up in!!

After taking off 3 door panels and testing almost everything, actuators, switches etc etc.