Printable View
I'm installing a push button remote starter and I can't find the correct wires to trigger the power locks. The module has lock and unlock negative trigger wires and I need to find out where to connect them. One thread showed a white and light blue in the door kick panel but these didn't work. The white and light blue carry ground or +12v depending on lock or unlock. Where can I find the relay triggers and are they positive or negative? Can't find any info on the web. Any help is appreciated.
That was the information that I used to try to hook up my system. The Light Blue and White type b connection didn't work. I was hoping to find the relay triggers and determine if they are negative or positive trigger. I connected my negative trigger wires into these and they did nothing. When I tested the volatge on these wires I found that one White orLight Blue will carry +12v while the other is ground and it reverses with lock or unlock. Not sure how these would work to trigger the relays.
What about pin 4 and 17?