•  
    Page 3 of 3 FirstFirst 123
    Results 21 to 30 of 30

    Thread: Water Pump Removal Problem.

    1. #21
      LXV-SCOOTADRIVE, ON! 2010AveoLT's Avatar
      Join Date
      Jan 2012
      Location
      Dickson, TN
      Posts
      896
      Thanks
      119
      Thanked 82 Times in 69 Posts
      Quote Originally Posted by xintersecty View Post
      usually after that long of a time out, the battery needs charging. Mine did when I did the shocks and body repairs. Just take it to auto shop and they are kind enough to charge it for you.
      Or you can get a battery charger rather cheaply.



    2. #22
      What's wrong with my car?
      Join Date
      May 2015
      Location
      Uniontown PA
      Posts
      3
      Thanks
      0
      Thanked 0 Times in 0 Posts
      05 Aveo 1.6 smoking oil when I start goes away after it runs for a few min just did head gasket and timing and had all the valve seals replaced order head kit any common problems with oil ?

    3. #23
      LXV-SCOOTADRIVE, ON! 2010AveoLT's Avatar
      Join Date
      Jan 2012
      Location
      Dickson, TN
      Posts
      896
      Thanks
      119
      Thanked 82 Times in 69 Posts
      Quote Originally Posted by knucklebuster View Post
      05 Aveo 1.6 smoking oil when I start goes away after it runs for a few min just did head gasket and timing and had all the valve seals replaced order head kit any common problems with oil ?
      Did the timing belt break? If it did, it may have damaged the valve guides, rendering the valve seals useless.

    4. #24
      What's wrong with my car?
      Join Date
      Mar 2015
      Location
      United States
      Posts
      11
      Thanks
      0
      Thanked 0 Times in 0 Posts
      The thing is I have the battery connected and all the lights, power locks, power windows work, but when I try cranking, the battery seems to die off. I tried jumping it and still wont turn on (it tries to crank but not turn on) I'm suspecting that the timing might be off or a sensor might be causing a problem.

    5. #25
      Almost time to do my timing belt xintersecty's Avatar
      Join Date
      Sep 2010
      Location
      West Union, SC
      Posts
      1,687
      Thanks
      86
      Thanked 181 Times in 156 Posts
      Oh yeah, I think you maybe right. Do you get any lights and can read it with a scanner? I wonder as the engine turns over it's staling the starter. Did you remove the cam shaft gears? If so how do you know they are lined up correctly. The marking is on the gear but the gear has to be one correctly for that mark to mean anything.
      Please do not power off, firmware update pending.....

    6. #26
      What do you mean there's no turbo? Chevy Customer Svc's Avatar
      Join Date
      Jan 2012
      Location
      Detroit, Michigan
      Posts
      361
      Garage empty: add car
      Thanks
      0
      Thanked 0 Times in 0 Posts
      Quote Originally Posted by chonzerfool View Post
      The thing is I have the battery connected and all the lights, power locks, power windows work, but when I try cranking, the battery seems to die off. I tried jumping it and still wont turn on (it tries to crank but not turn on) I'm suspecting that the timing might be off or a sensor might be causing a problem.
      Hello chonzerfool,

      We see that you're having trouble starting your vehicle and we'd like to apologize for the inconvenience you've experienced. I'd be happy to look into this situation further and contact your dealership on your behalf for further assistance. If this is something of interest, please send your contact information, VIN, mileage and preferred dealership in a private message.

      Thanks!

      Jasmine F
      Chevrolet Customer Care
      Don't forget to check out my.chevrolet.com link and take advantage of a wealth of vehicle information!

      For information on the GM Privacy Statement, please visit http://www.gm.com/privacy-statement.html

    7. #27
      Almost time to do my timing belt xintersecty's Avatar
      Join Date
      Sep 2010
      Location
      West Union, SC
      Posts
      1,687
      Thanks
      86
      Thanked 181 Times in 156 Posts
      Any updates? Want to see this to the end and that car on the road running
      Please do not power off, firmware update pending.....

    8. #28
      What's wrong with my car?
      Join Date
      Mar 2015
      Location
      United States
      Posts
      11
      Thanks
      0
      Thanked 0 Times in 0 Posts
      Took the battery to Walmart to have it replaced. They did a test and found that it had only 65 CCA instead of 600 CCA. They decided to charge the battery but in the end I ended up getting a replacement battery; the old one would not hold a charge (Dead). I Get home, redo all the steps and when it came time to crank the car, nothing still. I also noticed that the timing on the cam wheel is slightly off; the intake alignment is about a half a tooth off every time I put the belt on, and on top of that I also noticed that the belt seems to want to slip off, I put the proper tension every time but the belt looks like it want to fall off, could this be the tensioner failing?

    9. #29
      Almost time to do my timing belt xintersecty's Avatar
      Join Date
      Sep 2010
      Location
      West Union, SC
      Posts
      1,687
      Thanks
      86
      Thanked 181 Times in 156 Posts
      The water pump is what really tensions the system. The three allen nuts around the pump need to be tighten (locked down) once the system has the right tension. The tensioner should indicate the proper tension.

      So here is the right process. (don't be insulted if you already know this, we just don't know if you knew this.)
      1) loosen the allen nuts around the water pump
      2) rotate the water pump anti-clockwise to loosen tension, rotate the pump clockwise to increase tension.
      3) The tension should move where the arrow moves towards to the notch.
      4) Lock down the allen nuts

      I found the intake cam is sprung and does not like to point as aligned. This is where a cam lock tool where come handy:
      Universal Twin Cam Locking Timing Tool Kit for Petrol Diesel Engines Automotive | eBay
      Please do not power off, firmware update pending.....

    10. #30
      What's wrong with my car?
      Join Date
      Mar 2015
      Location
      United States
      Posts
      11
      Thanks
      0
      Thanked 0 Times in 0 Posts
      Sorry for the long wait. Long story short, sold the car; never got the car to turn on again.





    Page 3 of 3 FirstFirst 123

    Similar Threads

    1. Water Pump .. .to replace or not '06 90,000 miles
      By northguest47 in forum Troubleshooting and Maintenance
      Replies: 11
      Last Post: 06-14-2015, 04:36 AM
    2. Water pump position
      By maxpower10 in forum How-To
      Replies: 4
      Last Post: 08-16-2014, 09:03 PM
    3. water pump tensioning help
      By McGrinnan in forum Engine & Drivetrain
      Replies: 1
      Last Post: 08-04-2012, 04:57 AM
    4. Timing belt water pump co$t
      By jasonlap in forum Engine & Drivetrain
      Replies: 11
      Last Post: 01-06-2011, 02:20 AM
    5. HELP!! Water Pump Removal??
      By italsupra10 in forum Troubleshooting and Maintenance
      Replies: 2
      Last Post: 04-08-2010, 04:26 PM

    Tags for this Thread

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •