Trying to change the rear speaker... I don't have any sound now.. help!

[keepkool4lifenc]

Hi!

So, after having a new auto radio, I tried to change the rear speaker...
I've bought 2 three ways boxes one for each side.

I cut the cables for the right speaker and put them on the box... no sound...
Damn, I tried to put them bat to the rear speaker, no sound too!

The left side still working good...

That's a strange thing for me... what must I do..??....
I don't understand what happening... everything else is working good...

Any help please, thanks!

Patrick

[PERFECT_ESL]

1, try to set the balance and fader back to middle
2, open the box, how is the wire between the back of the speaker to the wall of the box. ( check all wiring)
3, must be your wires...

[petrified.rabbit]

if you cut the wires live, and they touched each other, you might have blown out the channel.

[PERFECT_ESL]

if you cut the wires live, and they touched each other, you might have blown out the channel.

rabbit,
one time ( more than one time, more than couple times) i cross the wire of the subs, and the whole system goes stastics,,, and then i seperate the wires it was fine,,,

it didnt blow the amp,,, (wire was crossed because i removed the sub and just let the wire sit on the trunk, and then i put stuff on top, moving around..... and then it touched,,, but when the wires are seperated, it goes normal,

[petrified.rabbit]

amps and oem are different, i have blown both. newer/better amps seem to have some sort of "protect system". where as oem and cheaper head units you can blow just like a fuse.