•  
    Results 1 to 5 of 5

    Thread: Question for P0131 & P0134 Errors

    1. #1
      What's wrong with my car? Martin1971's Avatar
      Join Date
      Jul 2017
      Location
      Benoni, South Africa
      Posts
      21
      Thanks
      0
      Thanked 0 Times in 0 Posts

      Question for P0131 & P0134 Errors

      Hi Guys

      I recently got a MIL light on, on my wife's Aveo 1.5LS and I used my scan tool and got a P0131 & P0134 error. I cleared the codes and drove around the block and the MIL light came back on. Scanned and got the same two error codes. I measured voltage on the connector that goes to the ECU and got 0.4V. I measure no resistance on the O2 sensor side. I don't know if I do the measurements correctly. I just measure straight on the two wires. Some websites suggest measure between the sense on the connector and ground on the block. Any advice? I want to replace the O2, but it's bit expensive so I want to be 100% sure it's the O2. Thank you.

      Martin



    2. #2
      2004 1.6 Auto Rust Free
      Join Date
      Jun 2019
      Location
      NC
      Posts
      552
      Thanks
      1
      Thanked 55 Times in 51 Posts
      An inexpensive obdII scanner that reads oxygen sensor voltage will be a good tool to use for this. If you look on the internet for videos that show how to interpret the readings, you will find out if they are good or not.

    3. #3
      What's wrong with my car? Martin1971's Avatar
      Join Date
      Jul 2017
      Location
      Benoni, South Africa
      Posts
      21
      Thanks
      0
      Thanked 0 Times in 0 Posts
      Thanks Eg.h2o

      I've used the Konnwei 860 scanner and picked up the 131 & 134 codes.

    4. #4
      2004 1.6 Auto Rust Free
      Join Date
      Jun 2019
      Location
      NC
      Posts
      552
      Thanks
      1
      Thanked 55 Times in 51 Posts
      Well….
      use that tool to look at the voltage of the sensors, use the graphing so you can see if they are dead, or just lazy. Use the o2 test to see what parts of the tests they pass. Use YouTube videos so you know what you’re looking at. Inspect the connectors for fitment, check for chaffed wires….the list goes on and on. Maybe you need new sensors, maybe you need to make a repair.

    5. #5
      What's wrong with my car? Martin1971's Avatar
      Join Date
      Jul 2017
      Location
      Benoni, South Africa
      Posts
      21
      Thanks
      0
      Thanked 0 Times in 0 Posts
      Okay, thanks. Will do so.





    Similar Threads

    1. Forum & server upgrade - keep an eye out for errors
      By MetroMPG in forum Forum Announcements and Updates
      Replies: 0
      Last Post: 06-27-2018, 04:21 PM
    2. please help me find problem (P0131, P0171, P0300)
      By Ryan53090 in forum Troubleshooting and Maintenance
      Replies: 3
      Last Post: 04-12-2018, 09:45 PM
    3. 2007 aveo ls showing p0131 and random/multiple misfire after parts replacement
      By XC1525 in forum Troubleshooting and Maintenance
      Replies: 2
      Last Post: 12-12-2016, 09:33 PM
    4. Keeps throwing P0134 for oxygen sensor codes
      By camopaint0707 in forum Engine & Drivetrain
      Replies: 6
      Last Post: 03-31-2016, 07:26 PM

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •