Originally family memeber ran it hot. Took heads to machine shop and guy at machine shop said head was warped charged $85 to supposely mill it and something else mechanic told me.
OK i have a feeling it been botherling me about the heads not being torqued down correctly cause I never seen a torque wrench the guy had. Its not over heating at all. Runs like there is nothing wrong with it at all until you raise hood and see the oil in reservoir. Have to keep checking the dip stick thou.
Anyone have the torque on each bolt handy? How many passes on each bolt? Below is the sequence order I received. 2009 chevy aveo LT 1.6 dual overhead cam.
http://www.aveoforum.com/forum/attac...d_sequence-jpg
IF that dont work the heads will go back to the machine shop that was suppose to have done whatever to it. I will keep ya posted on what I find. I should of went to college to fix and work on my own car shucks. Pay people and they half fix your vehicle and want you to pay money that you don't have to spend in the first place. SMH!! Got to find me a good honest mechanic.