I’ve got High Beams & DRL’s but No Low Beams. I’ve swapped relays, fuses, new bulbs and the dimmer switch out and still no luck. Any ideas?
Printable View
I’ve got High Beams & DRL’s but No Low Beams. I’ve swapped relays, fuses, new bulbs and the dimmer switch out and still no luck. Any ideas?
Headlight switch maybe?
Swapped with new one. No luck
Went thru relays to hear them clicking on/off, low beams dont click. swapped around no luck. Don't think there's power getting to it. I guess its a wire issue?
Double check fuses…make sure they are getting power.
Voltage are as follows: Does this still look like a wire issue? Low Beam Relay Doesn't click when on.
Battery - 11.8v's
High/Low Relays - 10.1v's
High/Low Beam Fuses - 9.9v's
All other fuses/relays - 11.0/11.1v's
Voltage is way low across the board. A charged battery is at
least 12.6V.
find and clean any and all power and ground points. Especially the fuse box.
on another note, see if you can jump the low beam relay to see if the lights go on.
Charged battery now volts are up to normal. Low beam relay wont click but does have power goin to it. Power at the switch is good too. Has to be a short somewhere. Fuse block look good underneath/top.
Drl module swapped, bulbs swapped, fuses/relays swapped. I've got drl's & high beams. Low beam relay Doesn't click. Is there an issue I'm the wiring in the switch?