need help with parts list - lost timeing belt

[gothstone]

2005 Aveo, idler pulley shattered even though it wasn't due for a timing belt for another 20k. Limited time to fix, and with holidays parts shipping will be an issue. So even though I haven't pulled the head yet, I'm making the bet that vales are bend but pistons will survive. I've done the timing belt a few times (several Aveos in family) but not the head rebuild. Where I could use help at the moment is the parts order list. Can anyone tell me what I'm missing?

8 intake vales
8 exhaust vales
valve stem seal set - no idea if this is necessary?
cylinder head bolt set with washers
cylinder head gasket
valve cover gasket
intake manifold gasket
timing belt set
water pump
antifreeze

[Daox]

You might want to add camshaft seals to the list since you're in there anyways. Valve stem seals are also a good idea since you're in there. Only other thing I can think of might be the front main seal if its leaking you can get to it now.

If you're looking to get by a little cheaper, you can probably get away without an intake manifold gasket. The inserts in the manifold seem to be pretty reusable. When I did mine I didn't replace them. Worst case you smear some rtv/gasket maker on them. They are pretty cheap though, so its your call.

Good luck!

[gothstone]

So I was able to purchase another car, and now I can do this without rushing. I've pulled the head, and the valves are barely bent. It would have had low compression, but probably would have run. Pistons are fine, and I expect the valve guides to be fine. I have added the following to the parts list:
Camshaft seals
drive belt
spark plugs
rear timing cover
spark plugs
OTC 4842 valve spring compressor
drive belt tensioner
oil and filter

So right now I'm looking at a total of $482

If anyone has any other recommendations or tips for this job, please let me know!