Printable View
it is now 138pm i need to be at work at 4pm. the sensor that wont allow the engine to start unless the clutch is in has fail or something. it thinks the clutch isnt in. is there a way to by pass this sensor so it thinks the clutch is always in? PLEASE HELP ASAP!!!!
its on the pedal, at the top, its a "release" switch. unplug the wire, and then it will either work jumped, or unhooked, depending on ho the wiring works. So unplug it, and ry to start it, then just the two wires with a paper clip and try to start it.
If the paper clip is needed wrap it in tape or something so it doesnt ground out.
yes i went to do that and found the switch, it wont start unglugged. i did get the car to start but i still want this dissables for my autostart that came in today. there are actually 3 wires from the switch. a blue, orange, and brown. i tried a paper clip between every comonation of two wire possible. all three wires need to be connected to something. but idk what. any ideas?Quote:
Originally Posted by petrified.rabbit
oh and btw i have an 09 aveo 5 hatch, idk if that helps shed some light onto this situation?
how did you get it to start?
it is a switch, looking through the wiring diagrams, (dont have 09 and up) the brown or orange is a hot in start, blue should go to the solenoid.
On the diagram i do have, its yellow is hot, purple go to solenoid, if automatic brown goes to transmission. try splicing all three together ? might blow a fuse or burn a signal wire though.. I think it has a signal to the computer and a signal to the starter..
Don't bypass it =/, just use a neutral sense switch.
I know I'm late with this one but...It's a 4 wire WHITE plug your looking for with only 2 wires in it (??) a yellow and a purple. Jump them with a paper clip
The one with the 3 wires is the clutch pedal position switch
there you go, goes right with what i found..
did you get to work on time at least?
I did and that makes sense so I need to look for a White plug purple and yellow wires got it. Then why did disconnecting the clutch position sensor stop me from starting?
Ok so I m having some trouble locating this white plug with the purple and yellow wires? Are you sure that it's the same for the 2009? I m going to check the 2005 when my fryers home to see ifi can find it on hers. Can you by chance post a pic. We are going to install the auto start on Tuesday if I can figure this out.
Ok so iPad messed up with auto correct, I meant "when my gf comes home" not when my fryers home
Ok so after many blood rushes to the head from sittin in my seat used down, I have found that there is no sensor
At te top of the pedal. The ONLY sensor is the clutch position sensor. The one with the three (orange blue and brown wires). I cannot find any white plug under there with a yellow an purple wire. I played with the sensor on the clutch. When I unhooked it from the pedal and just pushed/turned the sensor it allowe the car to start. So I feel me battle lies there. I think the 09 aveo5 hatch might be different from what ur talking about, or I just can't find what u r referring to. I believe the sensor on the clutch is some form of potentiometer. When I unplugged it, the car wouldn't start, and when I plug it back in, the car still refuses to start for a period of pushing the clutch in and out, trying to start and temping the keys from the ignition. It's a poor design in my view. A simple push button switch would have worked all the same and would be jump able. Can you either post a picture of an 09 or newer and show me where the white plug is supposed to be or fracture to me better. I can't seem to find a wiring diagram ANYWHERE and I m not paying for alldata online. Does anyone have alldata that could send me wiring diagrams for an 09 aveo 5 hatch. Please help me, I finally got the guys to work schedules around so we have all of Tuesday to put the autosart and keyless entry in. I need to disable this so I can start the car without clutch by then (and yes I know an autostart in a standard isn't recommended, believe me I ve heard. I m including a relay box that causes the car to honk instead of start I it is in gear.)
Post pics of the project and give us a write up if you can please. Especially with the clutch defeat deal. And good luck.
Update:
Well i still have not been able to properly disable the clutch to start on the newer Aveo. The clutch position sensor does effect the starting of the vehicle. When i tape the sensor in the right position the car will start without pushing the clutch in. However, the clutch position sensor (CPS) is used by other parts of the car. so even though u can start the car without clutch and everything works fine at first, the check engine light comes on and the car will not start after that until i un-tape the CPS and pump the clutch a bit. I have yet to try finding the Neutral safety switch, and jumping that, but i don't know if that will work. any ideas?
i think you need to wire in your remote start beyond those safety devices (since you are just bypassing the anyhow). that would allow less compromising of other systems and still getting the car to start with marginal safety.
so you mean instead of using the 12v hot wires from the ignition switch, to connect directly to the battery and then to the starter solenoid? like bypass it all? will that cause any issues?