Blower Motor stops working
Not sure what going on here but let me explain what happened. Starting out the day I had the a/c on and the fan switch on "high" setting. Sometime during the course of the day I noticed that the blower wasnt functioning on #4 setting eventhough it was set there. When I got home I shut down the car and pulled the 20 amp fuse in the panel located on the left side of the dashboard. That wasnt burnt. I then popped the hood, and checked the fuseblock and felt the relay which felt a little on the hot side to the touch, and I also checked the 30 amp fuse and that fuse wasnt burnt. I got back in the car and restarted it, hit the a/c switch, then turned on the blower. Nothing at all. At that point I went inside to take care of some stuff and left it alone. Later tonight I went out, started the car and the blower came on but still not at top speed. I let the blower run for like 20 minutes or so, and shut off the switch. Turned it back on and nothing. At about 12am I went out and checked it again, came on, not top speed, shut it down immediately, and turned it back on. Nothing after 1 minute of running. No fuses blown, maybe bad relay? Bad blower motor? Really sucks because about 2 months ago I had the a/c recharged and its freezy cold which is awesome!
Re: Blower Motor stops working
I don't have the A/C in my car, but I do know that the top speed of the blower motor (4th) has it's own setting in the relay, because when I switch through the rest of the speeds, nothing happens, but when I switch to the top speed, I hear a relay click. I think your guess about the relay is right. I'd look into that first.
Re: Blower Motor stops working
sounds like a blower motor resistor
not sure what year your cars is mines an 08 and the part number is 96435889
hope this helps
Re: Blower Motor stops working
Ok if its the resistor, where is it located?