Hello. I had an issue moving my clutch into gear. It would grind and I realized if I pushed harder than normal (MUCH harder) it would be smooth. 2 days later after tears depressing hard and must have pushed to far and blown the hydraulic slave cylinder. To good to a shop where they replace both the master and slave cylinder. So the pedal function correctly. But after the noticed probably cause the or extension of the pedal and the blowing of the hydraulic system was the clutch this dumb was not giving pressure back. So the clutch letter which pushes the throw a bearing moves freely with no resistance for the clutch. I drop the entire transmission replace the clutch and what I reinstalled the transmission a had the exact same issue. I have a video on YouTube all attached to hear. Any help would be great.

https://youtu.be/yzgwmt1Xqwc