I am in for a kit!
1. sflindall26
2.
3.
4.
5.
Only 4 to go!
Printable View
I am in for a kit!
1. sflindall26
2.
3.
4.
5.
Only 4 to go!
Hey rabbit, I just tried to pm you but your inbox is full.
i want these!!!! too bad we need to wait for 5 ppl??
cant i jus buy them before waiting lol.. not iterested in waiting. wanna get them done before or just after new year
Anyone interested in the endlink kit for coilovers? Sign up here.. need 5 orders!!
1. sflindall26
2.
3.
4.
5.
Come on ppl I know your out there :)
ya i tried to get enough interest at the start of the year, and we were close.. i have spoken with rabbit about these kits and suspension in general, he recommended a different setup for my rears because i plan on pulling a lightweight aluminum trailer and want to keep stock height on the rear and have adjustment there, however i would still be interested in the kit for the front, although i don't have any interest in lowering the suspension, saving some weight and switching to adjustable coilovers would be nice, and afaik for clearance issues there is a mandatory minimum lower with this kit.. don't know what it is though
count me in still..
Sounds good! Ok the list is growing!!!
1. Sflindall26
2. Northguest47
3.
4.
5.
Alright only 3 more to go!!
I'd deff be interested @sfindall26
Ok so we have three now!! 2 more to go :)
1. Sflindall26
2.northguest47
3.mikec06
4.
5.
Two more that's it! I know there I'd two more out there that's wants coils!!!!!
making progress i see.
Hopefully I can get the $125 before that list ends.
If someone else can go ahead and take me off, but if not, I'll be trying to get the money by then.
Yup! We are making progress!! Only 2 more to go.. Come on people!! And yes please make sure you have the money ready for rabbit once we hit 5 !!!
are these kits still for sale? how much to ship to florida? I just ordered my coil overs tonight and will need this kit soon.:violent2:
Yes rabbit will still make the kit as long as there is 5 or more people interested! He says the cost is about 125 with shipping. So with you that puts us at 4 people who are interested in the kit.
1.sflindall26
2.northguest47
3.mikec06
4.hairbender
5.
Just one more to go!!!!!!!!!!!
One more.... I know you are out there!!!! Lets do this :)
with just four of you i can probably still make them for about $150 a kit shipped.
Im in for that!!!! ok northguest47, mikec06 and hairbender lets get on this!!!!
damn...damn...damn....damn the wife is not gonna let me get in on this..lol
Don't tell her ;) lol..
Come on guys he is willing to do it with just four... Where is everyone?!?
So far it's just me and you in on a kit motoking212 I'm not sure what happened to everyone else.. So we still need atleast two more ppl for rabbit to make them.
Really everyone else flaked? Well this it seems it may be a while.....
Yeah I know.. I have been trying to get a set for a while now :(
And there is no one else that sells these things based on my research, correct?
Yes you would be correct! So if anyone is interested in the endlink kit to run coilovers please let us know we only need 2 more people!!!!!!!!!!!
Hey I am still here just been away from the forum for a bit, I would still be interested, just wanted confirmation on the minimum drop one can do with this kit to make sure it will work for me. I am still saving up and gathering parts for a pretty major overhaul of my car, and suspension and brakes are top of this list.
Yes I believe they require a min 2" drop. So if your still in that makes 3 ... Only one more!!!
Ya well I guess I will just go for it - the other option Rabbit recommended for me on the front was to purchase high quality inserts to change out the stock ones, but this would really improve the handling .. I really would be ok with a 1" drop, just trying to figure out how hilarious this lowered front end would look like with a trailer on the back and airbags in the rear coils for counter adjusting the tongue weight. Actually, now that I think about it with lowering springs on the rear this might work out quite well if when the airbags are deflated the rear end drops down too for 'sporty' mode.
Nice!!! I like it :) now we just need one other person!!!!
Honestly if I were you bro I would just buy 2. Get the ball rolling and sell one to the next guy looking to go that route. This is crazy how long this has been popping up. You will get your money back. So it would make sense to me to this.
Soo I have been on but count me in, I'll pay next week for sure (:
That's four rabbit!!
1.sflindall26
2.motoking212
3.northguest47
4.simple aveo
Sorry guys im out. Going a different route. My apologies.
OK here is the problem. If one is selling a product it might be in his best interest to clean out his pm inbox so one could sell said product. I have tried to get in comm with sflindall26 on this but no response other than rabbit will pm me with where to send my money. It's really simple. I have money. I need this kit. and need to know where to send my money. what the ****? It's been two weeks and no response from rabbit. I have brand new wheels tires and coil overs just sitting in my garage.angry9: pelocolorist@gmail.com 813-992-1113 michael
I feel your frustration bruh, waiting about 4 days now on a simple response about the l bracket , Nadda but shows active activity the past 2 nights, poor sales help on product, lack of customer service, and lack of being a cool down to earth car dood...
Jus pls help :( lol
you guys act like i run a business. I don't.
Hairbender, there is no where to send to the money for kits when the kits don't exist. If I get 5 orders I will make them, this entire thread is about that.
These kits cost me about $500 just for the pieces to put 5 kits together, then I pay to have those parts shipped to me, and then I repackage and ship to you. That is for the plasma cut plates, the spherical rod links when I get a price break for a "bulk" order at 10 rods, and the hardware which I can buy in bulk if i buy 5 kits.
the cost of one kit is about $300, unless you don't need to pay machinist set up fees for just one kit. its the bulk discounts of the other 4 kits that allow it to be $125 shipped.
There is really nothing in this for me.
at midwest control products.
SSHK-06-MSM-05.00 you need two. $50 plus shipping.
at a hardware store
20 Metric flat washers, Zinc plated steel, 12mm
4 Metric hex bolts, Zinc plated class 8.8 steel, 12mm x 1.5mm x 80mm
8 Metric hex nuts, Zinc plated class 8.8 steel, 12mm x 1.5mm
I was buying bulk, i don't have this specific pricing.
and cut 3/16" plates: this wont allow me to load a .dxf or a .cad file they are both invalid.
BUT IT LOOKS JUST LIKE THIS:
oh, and your right, I dont check my pm's, I have a bunch of incoming friend requests, and 99% of my pm's are the same questions people post in the threads. I don't get through all the threads in one sitting, and if i come back the the threads are no longer highlighted for new posts, I miss them. It happens. I generally try to get to the sections where people need help fixing their cars and get through that "emergency" stuff every night.
Besides that your both mad and neither of you are on the list of the four people interested in the GROUP BUY in order for orders to be placed THEN filled.
i understand where you are coming from im not like uber pissed at you haha
just need to get this damnnnnn car back in working order and ready for show seaosn,, which techinally starts next week for us canadians lol
i very much appriciate the help on these specs i needed, only thing, i know you cant upload the original image, but the measurement is 2.5"? between the bottom holes, its just a little bit hard to read thats all.
thanks alotttttttttt :))))))))
So rabbit I was on the list and thats why im pissed at the lack of responsibility on your part. Page 10 #94 on this tread I was on the list and for some reason after two messages from sflindall26 about getting ready to buy this kit I was taken off the list. and untill now no communication from you at all. I get this is not your regular job but it is something you should be responsible for. And buy my math you should be making about $200. To $250 when all is said and done with 5 kits.
Hairbender sorry I missed your pms I didn't get a notification for them. The only place Townsend your money is through rabbit on PayPal. I thought I told u that already tho, but sorry for the late response. I have taken myself off of the current list because I am going a different route with my suspension. Hope this all works out for you guys!!