Chevrolet Aveo from portugal

Hello,

I´m a User from portugal, and i´ve bought an Aveo 09.

Its a 1.2cc Whith 84 Bhp and its the LT version!
Still in the dealership:
http://i277.photobucket.com/albums/k...cmsc/Aveo3.jpg

Photos:
http://i277.photobucket.com/albums/k...c/DSC_0481.jpg
http://i277.photobucket.com/albums/k...c/DSC_0482.jpg
http://i277.photobucket.com/albums/k...c/DSC_0463.jpg
http://i277.photobucket.com/albums/k...c/DSC_0469.jpg

The engine
http://i277.photobucket.com/albums/k...c/DSC_0477.jpg

Whith is friend
http://i277.photobucket.com/albums/k...c/DSC_0486.jpg

Ita has now 7500KM

I´m very happy with him, its nice to drive...

nice, the factory rims look good

Yes they look good, But i want to put a rims on German stile...

1.2 :roll: :lol:

it looks sooooooooooo small

Quote:

---

Originally Posted by acdc1287

1.2 :roll: :lol:

---

Yes, and its enouth...

i would perfer the 1.2 over the 1.6

Quote:

---

Originally Posted by thehunterooo

i would perfer the 1.2 over the 1.6

---

here in Portugal , there only the 1.2 whith 84bhp and the 1.4 whith 101bhp, But the 1.4 because is a older engine, is almost like the 1.2 in acceleration, and the 1.2 is more economical
so the 1.4 is not worth buying.

Can i put the cruse control in my Aveo?

so a car with 200 hp in portugal would be like driving a dragster

Pretty much, i should borrow my brother's mazdaspeed 3 and go over there lol :lol:

Quote:

---

Originally Posted by serginho

Can i put the cruse control in my Aveo?

---

not easily, you have a throttle cable.

they still use cables even on the 09 :P

GM is cheap :P

Yes its cheap, for those who cant buy other car... its a good Value for money...

Throtle cable... i think not, bum i´m gona check.

you can see the throttle cable in the picture posted above.

i can see it now, i wonder if you could convert it?

Yes, my Aveo have Throtle cable.

The Aveos there dont have? can you show me an photo from your engines?

too big: http://z.about.com/d/cars/1/0/9/R/1/ag_ ... engine.jpg[/img]

http://img4.imageshack.us/img4/8169/img2863w.jpg

hard to see but we are drive by wire like vw audi and skoda

raddit did you put that brace on the CAI by yourself or did it come with it, i still have to get one for my short ram

its the cheap piece that came with mine. under the maf it is folded to a 90 degree angle and slipped into the hose clamp..

i am going to make a better one sometime.

lol yeah, i cut off one of the rubber sleves off one of the hoses and taped it on the ac pipe thing or whatever that siver thing is as the intake was messing it up, but i havent had no probems with it

Quote:

---

Originally Posted by petrified.rabbit

its the cheap piece that came with mine. under the maf it is folded to a 90 degree angle and slipped into the hose clamp..

i am going to make a better one sometime.

---

Might need a better one sooner than you think. There's no provision for engine movement the way it's currently setup. The air pipe should be secured to the engine, not the chassis. At least, not that close (short distance) from the throttle.

lol true, the engine moves a lot, i dont know where you would srcure it on the engine though, ill have to look later

you could make a bracket that uses the top thread of the engine side of the engine mount. then it will move with then engine.

but as it is now, the metal piece is cheap and flimsy, allowing the intake to move a little bit. and with leaing the play in the silicone. I reved the engine up and down and got it moving, and the intake doesn't move as much as i thought..

but the factory intake is bolted to the chassis

but the stock intake got the flexable hose tube thing right?

yeah but his new intake has silicone coupling which acts as a flex coupling as well

Hello there,

I'm Back with my 1.2 Aveo:p.

My Aveo has now 5 years and 48000 km (30000 miles)

The only thing that is wrong, is a noise in the suspension