OEM strut pics?

[marmite369]

ok when im next at home i will serch them out and get the good old tape mesure on them for you mate. any ideas if the fronts will be different to the rear springs as if they are the same i can just measure on and be lazy lol

[XJCasper]

Subscribing to see if we might get a new option for suspension parts.

Not getting my hopes up.

[Pontiac1976]

Is this ok. I hope this helps you.

[marmite369]

ok well the mother has burried themin the junk in the loft so i will try to hunt them out over this weekend, sorry taking me so long to get arround to do this just seriosuly barely get 5 minsto myself these days grr

[one_man_jam]

sooo clean. that looks awesome. xd/yaris parts would be nice even if it took a little modifying to make
fit. they do have a way bigger source of aftermarket support out there.

sooo is this a yaris i'm looking at...or an xd?? just wondering

[thebarber]

sooo clean. that looks awesome. xd/yaris parts would be nice even if it took a little modifying to make
fit. they do have a way bigger source of aftermarket support out there.

sooo is this a yaris i'm looking at...or an xd?? just wondering

xd

im most curious of the stock spring lengths, but Pontiac1976, if you could measure the compressed height from the spring seat to the underside of the top hat, that'd be helpful. also measure the distance from the bottom of the strut to the sway bar link bolt hole (center of the hole)

thanks for the pics!

[thebarber]

any measurements for me?!

[Pontiac1976]

have the off specks been getting snow rain should have this weekend

LF. 10"From the top washer hat to the higher side of the bottom spring pad and 12 1/2 " top same place to the Eye
RF. 10 1/4"From the top washer hat to the higher side of the bottom spring pad and 13 " top same place to the Eye
Now this might be that the nuts tightened at the same TQ.

[Pontiac1976]

The spec. you ask for are around 10 1/2" from the top to the eye I hope this helps you