Re: FAQ
Posted: Mon Sep 14, 2009 5:53 pm
Grill mod for 1st Gen. Aveo:
Originally posted by the barber.
Thought since i was removing the front chevy bow-tie from the aveo today id make a how-to...
Before:
There are 5 screws you need to remove to get the grill assembly out (3 are metal and 2 are plastic):
Passenger to drivers side:
Once you have the grill assembly out, you need to remove 6 small screws on the back:
...and 4 clips (i used a flat-head screw driver to get them out):
Then the bow-tie just pops right out...
Put the grill back into place and reinstall the 5 screws to hold the grill in, and youre done!
Overexposed shot so you can sorta see the mesh....
Originally posted by the barber.
Thought since i was removing the front chevy bow-tie from the aveo today id make a how-to...
Before:
There are 5 screws you need to remove to get the grill assembly out (3 are metal and 2 are plastic):
Passenger to drivers side:
Once you have the grill assembly out, you need to remove 6 small screws on the back:
...and 4 clips (i used a flat-head screw driver to get them out):
Then the bow-tie just pops right out...
Put the grill back into place and reinstall the 5 screws to hold the grill in, and youre done!
Overexposed shot so you can sorta see the mesh....